ambari在线安装偶数HAWQ

环境清单：

主机1: 内网: 192.168.6.165
主机2: 内网: 192.168.6.166
主机3: 内网: 192.168.6.167

系统配置清单：

IP	HOSTNAME	CPU	MEM	DISK	RELEASE
192.168.6.165	ambari01	2核	4G	50G	CentOS Linux release 7.3.1611 (Core)
192.168.6.166	ambari02	2核	4G	50G	CentOS Linux release 7.3.1611 (Core)
192.168.6.167	ambari03	2核	4G	50G	CentOS Linux release 7.3.1611 (Core)

★centos 7 获取【ambari.repo】

#> wget -nv http://public-repo-1.hortonworks.com/ambari/centos7/2.x/updates/2.4.2.0/ambari.repo -O /etc/yum.repos.d/ambari.repo

#> cat /etc/yum.repos.d/ambari.repo

#> yum repolist

★centos 7 安装【 ambari-server】

#> yum install ambari-server

★centos 7 配置【 ambari-server】

0.配置所有机器/etc/hosts

192.168.6.165 ambari01

192.168.6.166 ambari02

192.168.6.167 ambari03

1.打通所有机器信任

#> ssh-******
#> ssh-copy-id ambari01
#> ssh-copy-id ambari02
#> ssh-copy-id ambari03

2.关闭所以机器selinux

#> sed -i 's/SELINUX=.*/SELINUX=disabled/' /etc/selinux/config
#> setenforce 0
#> getenforce

3.关闭所有机器的防火墙

#> systemctl stop firewalld.service
#> systemctl disable firewalld.service

4.配置所有机器的sysctl.conf

kernel.shmmax = 1000000000
kernel.shmmni = 4096
kernel.shmall = 4000000000
kernel.sem = 250 512000 100 2048
kernel.sysrq = 1
kernel.core_uses_pid = 1
kernel.msgmnb = 65536
kernel.msgmax = 65536
kernel.msgmni = 2048
net.ipv4.tcp_syncookies = 0
net.ipv4.conf.default.accept_source_route = 0
net.ipv4.tcp_tw_recycle = 1
net.ipv4.tcp_max_syn_backlog = 200000
net.ipv4.conf.all.arp_filter = 1
net.ipv4.ip_local_port_range = 1281 65535
net.core.netdev_max_backlog = 200000
fs.nr_open = 3000000
kernel.threads-max = 798720
kernel.pid_max = 798720
# increase network
net.core.rmem_max=2097152
net.core.wmem_max=2097152

5.安装并配置ntp

--安装ntp
#> yum install -y ntp
#> service ntpd start
--配置ntp请参考百度

6.配置ambari-server

#> ambari-server setup

--下列是setup打印的信息

[[email protected] ~]# ambari-server setup

Using python /usr/bin/python

Setup ambari-server

Checking SELinux...

SELinux status is 'disabled'

Customize user account for ambari-server daemon [y/n] (n)? y

Enter user account for ambari-server daemon (root):

Adjusting ambari-server permissions and ownership...

Checking firewall status...

Checking JDK...

[1] Oracle JDK 1.8 + Java Cryptography Extension (JCE) Policy Files 8

[2] Oracle JDK 1.7 + Java Cryptography Extension (JCE) Policy Files 7

[3] Custom JDK

==============================================================================

Enter choice (1):

To download the Oracle JDK and the Java Cryptography Extension (JCE) Policy Files you must accept the license terms found at http://www.oracle.com/technetwork/java/javase/terms/license/index.html and not accepting will cancel the Ambari Server setup and you must install the JDK and JCE files manually.

Do you accept the Oracle Binary Code License Agreement [y/n] (y)? y

Downloading JDK from http://public-repo-1.hortonworks.com/ARTIFACTS/jdk-8u77-linux-x64.tar.gz to /var/lib/ambari-server/resources/jdk-8u77-linux-x64.tar.gz

jdk-8u77-linux-x64.tar.gz... 100% (173.0 MB of 173.0 MB)

Successfully downloaded JDK distribution to /var/lib/ambari-server/resources/jdk-8u77-linux-x64.tar.gz

Installing JDK to /usr/jdk64/

Successfully installed JDK to /usr/jdk64/

Downloading JCE Policy archive from http://public-repo-1.hortonworks.com/ARTIFACTS/jce_policy-8.zip to /var/lib/ambari-server/resources/jce_policy-8.zip

Successfully downloaded JCE Policy archive to /var/lib/ambari-server/resources/jce_policy-8.zip

Installing JCE policy...

Completing setup...

Configuring database...

Enter advanced database configuration [y/n] (n)?

Configuring database...

Default properties detected. Using built-in database.

Configuring ambari database...

Checking PostgreSQL...

Running initdb: This may take up to a minute.

Initializing database ... OK

About to start PostgreSQL

Configuring local database...

Connecting to local database...done.

Configuring PostgreSQL...

Restarting PostgreSQL

Extracting system views...

ambari-admin-2.4.2.0.136.jar

............

Adjusting ambari-server permissions and ownership...

Ambari Server 'setup' completed successfully.

[[email protected] ~]#

7.启动ambari-server

#> ambari-server start

--下列是打印的信息

Using python /usr/bin/python

Starting ambari-server

Ambari Server running with administrator privileges.

Organizing resource files at /var/lib/ambari-server/resources...

Ambari database consistency check started...

No errors were found.

Ambari database consistency check finished

Server PID at: /var/run/ambari-server/ambari-server.pid

Server out at: /var/log/ambari-server/ambari-server.out

Server log at: /var/log/ambari-server/ambari-server.log

Waiting for server start....................

Ambari Server 'start' completed successfully.

★安装hawq ambari插件

#> wget -P /etc/yum.repos.d/ http://yum.oushu-tech.com/oushurepo/oushudatabaserepo/centos7/3.1.2.0/oushu-database-cent73.repo

#> yum install -y oushu-database-ambari-plugin
#> cd /var/lib/hawq/
#> ./add-hawq.py --stack HDP-2.5 --hawqrepo http://yum.oushu-tech.com/oushurepo/yumrepo/release/oushu-database/centos7/3.1.2.0/release/

★重新启动ambari-server

#> ambari-server restart

★ambari-serverweb验证登陆

http://xxx.xxx.xxx.xxx:8080

ambari在线安装偶数HAWQ

★ambari-serverweb点击create a cluster

ambari在线安装偶数HAWQ

★ambari-serverweb安装HDFS和zookeeper组件

ambari在线安装偶数HAWQ

★ambari-serverweb安装hawq组件

1.add service wizard 中选择hawq

2.customize service，设置hawq用户密码

ambari在线安装偶数HAWQ

★测试hawq是否成功部署

--master操作
#> su - gpadmin
$> source /usr/local/hawq/greenplum_path.sh
$> psql -d postgres
postgres=# select * from gp_segment_configuration;  #确定所有节点是up状态
postgres=# create table t(i int);
postgres=# insert into t select generate_series(1,1000);
postgres=# select count(*) from t;

参考:

http://www.oushu.io/docs/ch/deployment.html

ambari在线安装偶数HAWQ

相关推荐