While循环内的C++ For循环
我正在尝试编写一个程序,该程序从用户处获取测量值并将它们输入到矢量中。 while循环继续,直到用户输入'|'在此时它会跳出循环并打印测量结果。然而,我遇到的问题是,当试图将测量结果添加到矢量中时。我使用了调试器,发现循环从未实际进入for循环,因此无法达到“push_back语句”。While循环内的C++ For循环
该程序是Bjarne Stroustup PPP C++书籍的一部分。
#include "../../std_lib_facilities.h"
double metreConvert (double userInput , String unit) {
if (unit == "cm")
userInput = userInput/100;
else if (unit == "in")
userInput = (userInput * 2.54)/100;
else if (unit == "ft")
userInput = ((userInput * 12) * 2.54)/100;
else if (unit == "m")
userInput;
return userInput;
}
void numbers() {
double input;
String unit;
vector <double> measurements;
while (cin >> input >> unit && input != '|'){
if (unit == "cm")
input = input/100;
else if (unit == "in")
input = (input * 2.54)/100;
else if (unit == "ft")
input = ((input * 12) * 2.54)/100;
else if (unit == "m")
input;
for (int i=0; measurements.size(); i++){
if (i == 0 || input != measurements[i]){
cout << "\nPopping onto vector";
measurements.push_back(input);
}
else {
cout << "\nMeasurment cannot be placed on vector";
}
}
}
cout << "input ended";
}
void main() {
cout << "Please enter a number followed by a unit(metres,cm,inches,ft), type '|' when finished inputing:";
numbers();
}
雷米说什么,加:
for循环声明的第二部分是一个条件,这应该评估为真或假。在你的情况下,你的情况是measurements.size()
问题是你的测量向量中没有任何东西,所以measurements.size()将返回0.这相当于false。我怀疑这实际上不是你想要做的,你可能是这样意思的:
for (int i=0; i < measurements.size(); i++){
即使这样,你的逻辑是错误的。假设您只是试图将每个输入的值添加到测量向量中(如果它不等于之前的测量值),我不明白为什么您需要在这里完成for循环。这将做你想要的:
while (cin >> input >> unit && input != '|')
{
if (unit == "cm")
input = input/100;
else if (unit == "in")
input = (input * 2.54)/100;
else if (unit == "ft")
input = ((input * 12) * 2.54)/100;
else if (unit == "m")
input; //No idea what this is supposed to be - more missing code?
if (!measurements.size() || input != measurements[measurements.size()-1])
{
cout << "\nPopping onto vector";
measurements.push_back(input);
}
else
{
cout << "\nMeasurment cannot be placed on vector";
}
}
干杯队友,这是一个很大的帮助 – Shaun1810
input
是double
。 |
是char
。它们不是同一件事。因此cin
失败并且您的while
循环未输入。要做你正在尝试的,你需要首先输入数据作为string
,检查其值为|
,如果不匹配,则将其转换为double
进行进一步处理。
我知道|是一个字符,我输入到一个double,但我已经得到的代码没有for循环,我添加,所以用户不能两次添加相同的东西。 – Shaun1810
此行
for (int i=0; measurements.size(); i++){
引起环路如果measurements
矢量不为空永远运行(而不是在所有如果向量是空的)。也许你的意思
i < measurements.size()
请正确缩进你的代码。另外,'for'循环之前的'input'是什么? –
measurements.size() - 也许检查不是0? – Jona