ChucK操纵杆控制
问题描述:
我想从操纵杆接收输入。输入已收到 声音应该产生。这有效,但它响应推动和释放操纵杆的按钮。我如何才能让它只响应推送而不是发布。ChucK操纵杆控制
更多内容如何让事件监听器响应180度的操纵杆动作。目前,当我移动操纵杆它将继续发出声音,我已经发布了,即使长时间后
Hid myHid;
HidMsg msg;
0=>int device;
if(!myHid.openJoystick(device)){
<<<"Couldn't">>>;
me.exit();
}
<<<"Ready">>>;
SndBuf coin=>dac;
0.6=>coin.gain;
0=>coin.pos;
while(1){
myHid=>now;
while(myHid.recv(msg)){
<<<"Rev">>>;
me.dir()+"/audio/smw_jump.wav"=> coin.read;
.2::second=>now;
}
}
答
// make HidIn and HidMsg
Hid hi;
HidMsg msg;
SndBuf jump=>dac;
SndBuf coin=>dac;
SndBuf power_up=>dac;
SndBuf blaster=>dac;
0.85=>coin.gain;
0=>coin.pos;
.6=>jump.gain;
0=>jump.pos;
.85=>power_up.gain;
0=>power_up.pos;
.6=>blaster.gain;
0=>blaster.pos;
// which joystick
0 => int device;
// get from command line
if(me.args()) me.arg(0) => Std.atoi => device;
// open joystick 0, exit on fail
if( !hi.openJoystick(device)) me.exit();
<<< "joystick '" + hi.name() + "' ready", "" >>>;
// infinite event loop
while(true)
{
// wait on HidIn as event
hi => now;
// messages received
while(hi.recv(msg))
{
// joystick axis motion
if(msg.isAxisMotion())
{
//this is where we pan
<<< "joystick axis", msg.which, ":", msg.axisPosition >>>;
// OR
//if (msg.which == 0) <<< "joystick axis", msg.which, ":", msg.axisPosition >>>;
//if (msg.which == 1) <<< "joystick axis", msg.which, ":", msg.axisPosition >>>;
}
// joystick button down
else if(msg.isButtonDown())
{
<<< "joystick button", msg.which, "down" >>>;
if(msg.which==0){
me.dir()+"/audio/Laser Blasts-SoundBible.com-108608437.wav"=> blaster.read;
.2::second=>now;
}
if(msg.which==4 || msg.which==2 ||msg.which==3 ||msg.which==5){
me.dir()+"/audio/smw_coin.wav"=> jump.read;
.2::second=>now;
}
}
// joystick button up
else if(msg.isButtonUp())
{
<<< "joystick button", msg.which, "up" >>>;
}
// joystick hat/POV switch/d-pad motion
else if(msg.isHatMotion() && msg.idata==0)
{
<<< "joystick hat", msg.which, ":", msg.idata >>>;
me.dir()+"/audio/smb_powerup.wav"=> power_up.read;
.2::second=>now;
}
}
}