升压线坏访问
UPDATE:如果我使用的libC++编译,然后我发现了错误,但是当我改变了编译器与libstdC++(GNU C++标准库),程序将不显示任何错误运行。升压线坏访问
我从升压网站尝试一些示例代码,当运行这段代码不知何故,我得到一个坏访问错误。代码运行良好,直到它调用它看起来的析构函数。
-lmysqlclient
-lm
-lz
-lboost_date_time
-lboost_system
-lboost_filesystem
链接。
有没有人知道我做错了什么?
#include <iostream>
#include <boost/asio.hpp>
#include <boost/thread/thread.hpp>
#include <boost/bind.hpp>
#include <boost/date_time/posix_time/posix_time.hpp>
class printer
{
public:
printer(boost::asio::io_service& io)
: strand_(io),
timer1_(io, boost::posix_time::seconds(1)),
timer2_(io, boost::posix_time::seconds(1)),
count_(0)
{
timer1_.async_wait(strand_.wrap(boost::bind(&printer::print1, this)));
timer2_.async_wait(strand_.wrap(boost::bind(&printer::print2, this)));
}
~printer()
{
std::cout << "Final count is " << count_ << "\n";
}
void print1()
{
if (count_ < 10)
{
std::cout << "Timer 1: " << count_ << "\n";
++count_;
timer1_.expires_at(timer1_.expires_at() + boost::posix_time::seconds(1));
timer1_.async_wait(strand_.wrap(boost::bind(&printer::print1, this)));
}
}
void print2()
{
if (count_ < 10)
{
std::cout << "Timer 2: " << count_ << "\n";
++count_;
timer2_.expires_at(timer2_.expires_at() + boost::posix_time::seconds(1));
timer2_.async_wait(strand_.wrap(boost::bind(&printer::print2, this)));
}
}
private:
boost::asio::strand strand_;
boost::asio::deadline_timer timer1_;
boost::asio::deadline_timer timer2_;
int count_;
};
int main()
{
boost::asio::io_service io;
printer p(io);
boost::thread t(boost::bind(&boost::asio::io_service::run, &io));
io.run();
t.join();
return 0;
}
林不知道这是否是一个堆栈跟踪...
我建立并使用gcc 4.2.1没有问题
跑到你在我的Mac代码samm$ g++ --version
i686-apple-darwin11-llvm-g++-4.2 (GCC) 4.2.1 (Based on Apple Inc. build 5658) (LLVM build 2336.1.00)
Copyright (C) 2007 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
samm$ ./a.out
Timer 1: 0
Timer 2: 1
Timer 1: 2
Timer 2: 3
Timer 1: 4
Timer 2: 5
Timer 1: 6
Timer 2: 7
Timer 1: 8
Timer 2: 9
Final count is 10
samm$
我用这个相同的工具链来建立d我的增强库
samm$ grep BOOST_LIB_VERSION /opt/local/include/boost/version.hpp
// BOOST_LIB_VERSION must be defined to be the same as BOOST_VERSION
#define BOOST_LIB_VERSION "1_53"
samm$
我建议使用相同的工具链来构建boost和您的应用程序。
我刚刚在boost站点使用了“tutorial”来构建boost,我下载并安装了一个新的Xcode和命令行工具,然后我下载了boost 1_53_0并运行了'sudo ./bootstrap.sh --prefix = usr/local /',并用'./b2 install'来安装它。我没有改变任何东西,我在这里输了。我可以使用其他的boost函数,但只有“线程”给我一个错误,我真的要使用升压,使计时器... – Robert 2013-03-20 22:47:15
'$ G ++ --version 的i686-苹果darwin11-LLVM-G ++ - 4.2(GCC)4.2.1(基于苹果公司建立5658)(LLVM构建2336.11。 00) 版权所有(C)2007*软件基金会,公司 这是*软件;请参阅复制条件的来源。有没有 保修;甚至不是针对特定PURPOSE.'适销性或 '$ grep的BOOST_LIB_VERSION /usr/local/include_64bit/boost/version.hpp // BOOST_LIB_VERSION必须被定义为同BOOST_VERSION 的#define BOOST_LIB_VERSION“1_53” ' – Robert 2013-03-20 22:53:47
当我在VS 2010中执行此操作时,没有访问冲突。奇。 – 2013-03-16 09:52:12
代码中没有看到任何错误。当您仅链接到所需的最小子库时,是否还存在访问违规? – 2013-03-16 14:16:20
附上一个调试器,并在程序收到BUS或SEGV信号时向我们显示堆栈跟踪信息。 – 2013-03-16 14:40:25