mac声音输出设备路径_如何在Mac上切换声音输出设备
mac声音输出设备路径
If you’re not hearing system sound from a certain device connected to your Mac—such as a monitor with built-in speakers, a Bluetooth device, or a USB audio interface—it’s time to check your sound output device settings. Here’s how.
如果您没有从连接到Mac的特定设备上听到系统声音，例如带有内置扬声器的显示器，蓝牙设备或USB音频接口，那么该是检查声音输出设备设置的时候了。 这是如何做。
First, click the Apple menu in the upper-left corner of the screen and select “System Preferences.”
首先，点击屏幕左上角的Apple菜单，然后选择“系统偏好设置”。
In System Preferences, click “Sound.”
在系统偏好设置中，单击“声音”。
In the “Sound” preferences window, click the “Output” button.
在“声音”首选项窗口中，单击“输出”按钮。
In Output preferences, you will see a list of connected and recognized audio output devices. Click the entry for the device that you’d like to use, and system sound will be routed to that device.
在输出首选项中，您将看到已连接和已识别的音频输出设备的列表。 单击您要使用的设备的条目，系统声音将被路由到该设备。
Also, if you have enabled “Show volume in the menu bar” in Sound preferences, you can also quickly switch between audio output devices by clicking on the speaker icon in your menu bar.
另外，如果在“声音”首选项中启用了“在菜单栏中显示音量”，则还可以通过单击菜单栏中的扬声器图标来快速在音频输出设备之间切换。
As you switch audio output devices, you might notice that some of the devices do not support controlling output volume via macOS (via the software sliders or volume buttons on the keyboard). In that case, you will need to adjust the volume of that device using a control element on the device itself—such as a knob, slider, or buttons.
切换音频输出设备时，您可能会注意到某些设备不支持通过macOS(通过软件滑块或键盘上的音量按钮)控制输出音量。 在这种情况下，您将需要使用设备本身上的控制元素(例如旋钮，滑块或按钮)来调整该设备的音量。
Mac声音输出故障排除 (Mac Sound Output Troubleshooting)
If you’re having trouble routing audio to a device that connects via Bluetooth (such as AirPods or Bluetooth speakers), open System Preferences, click “Bluetooth,” and make sure the device is currently connected.
如果您在将音频路由到通过蓝牙连接的设备(如AirPods或蓝牙扬声器)时遇到问题，请打开“系统偏好设置”，单击“蓝牙”，并确保该设备当前已连接。
If the troublesome device is a USB audio interface, check the manufacturer’s website for the latest Mac drivers. You might need to install those to have the device recognized on your Mac. You could also try using a different USB cable to connect the device to your Mac. USB cables sometimes become faulty.
如果麻烦的设备是USB音频接口，请访问制造商的网站以获取最新的Mac驱动程序。 您可能需要安装这些设备才能在Mac上识别设备。 您也可以尝试使用其他USB电缆将设备连接到Mac。 USB电缆有时会出现故障。
And with so many monitors including speakers these days, it’s easy to assume that every monitor has them built-in, but many do not. Check your monitor’s specifications to see if audio output is included. If not, you may need to plug external speakers into your Mac to hear sound at a comfortable level.
如今，由于包括监听器在内的监视器数量如此之多，因此很容易假设每台监视器都内置了这些监视器，但许多监视器却没有。 检查显示器的规格以查看是否包括音频输出。 如果不是这样，则可能需要将外部扬声器插入Mac才能听到舒适的声音。
If all else fails, try updating your Mac’s software or restarting the system, both of which can solve a wide range of software-related audio problems. Good luck!
如果其他所有方法均失败，请尝试更新Mac的软件或重新启动系统 ，两者都可以解决与软件有关的各种音频问题。 祝好运！
翻译自: https://www.howtogeek.com/682004/how-to-switch-sound-output-devices-on-a-mac/
mac声音输出设备路径