Oracle Database 11g Release 2 RAC On Linux Using VMware Server 2
This article describes the installation of Oracle Database 11g release 2 (11.2 64-bit) RAC on Linux (Oracle Enterprise Linux 5 64-bit) using VMware Server 2 with no additional shared disk devices.
- Introduction
- Download Software
- VMware Server Installation
- Virtual Machine Setup
- Guest Operating System Installation
- Oracle Installation Prerequisites
- Install VMware Client Tools
- Create Shared Disks
- Clone the Virtual Machine
- Install the Grid Infrastructure
- Install the Database
- Check the Status of the RAC
Introduction
One of the biggest obstacles preventing people from setting up test RAC environments is the requirement for shared storage. In a production environment, shared storage is often provided by a SAN or high-end NAS device, but both of these options are very expensive when all you want to do is get some experience installing and using RAC. A cheaper alternative is to use a FireWire disk enclosure to allow two machines to access the same disk(s), but that still costs money and requires two servers. A third option is to use VMware Server to fake the shared storage.Using VMware Server you can run multiple Virtual Machines (VMs) on a single server, allowing you to run both RAC nodes on a single machine. In additon, it allows you to set up shared virtual disks, overcoming the obstacle of expensive shared storage.
Before you launch into this installation, here are a few things to consider.
- The finished system includes the host operating system, two guest operating systems, two sets of Oracle Grid Infrastructure (Clusterware + ASM) and two Database instances all on a single server. As you can imagine, this requires a significant amount of disk space, CPU and memory. I completed this installation on a Quad-Core processor with 8G of memory, so don't expect to work on a low spec machine.
- Following on from the last point, the VMs will each need 2G of RAM, preferably 3-4G if you don't want the VM to swap like crazy. As you can see, 11gR2 RAC requires much more memory than 11gR1 RAC. Don't assume you will be able to run this on a small PC or laptop. You won't.
- This procedure provides a bare bones installation to get the RAC working. There is no redundancy in the Grid Infrastructure installation or the ASM installation. To add this, simply create double the amount of shared disks and select the "Normal" redundancy option when it is offered. Of course, this will take more disk space.
- During the virtual disk creation, I always choose not to preallocate the disk space. This makes virtual disk access slower during the installation, but saves on wasted disk space.
- This is not, and should not be considered, a production-ready system. It's simply to allow you to get used to installing and using RAC.
- The Single Client Access Name (SCAN) should really be defined in the DNS or GNS and round-robin between one of 3 addresses, which are on the same subnet as the public and virtual IPs. In this article I've defined it as a single IP address in the "/etc/hosts" file, which is wrong and will cause the cluster verification to fail, but it allows me to complete the install without the presence of a DNS.
- The virtual machines used are only given 2Gig of swap, which causes a prerequisite check failure, but doesn't prevent the installation working. If you want to avoid this, define 3+Gig of swap.
- This article uses the 64-bit versions of Oracle Enterprise Linux and Oracle 11g Release 2.
Download Software
Download the following software.VMware Server Installation
Regardless of the host OS, the setup of the virtual machines should be similar.First, install the VMware Server software. On Linux you do this with the following command as the root user.
Then finish the configuration by running the vmware-config.pl script. as the root user. Most of the questions can be answered with the default response by pressing the return key. An example of the output can be seen here.# rpm -Uvh VMware-server*.rpm Preparing... ########################################### [100%] 1:VMware-server ########################################### [100%] The installation of VMware Server 2.0.0 for Linux completed successfully. You can decide to remove this software from your system at any time by invoking the following command: "rpm -e VMware-server". Before running VMware Server for the first time, you need to configure it for your running kernel by invoking the following command: "/usr/bin/vmware-config.pl". Enjoy, --the VMware team #
The web-based VMware Intrastructure Web Access Console is started by issuing the command "vmware" at the command prompt, or by pointing your browser to one of the two following URLs depending on whether you need Secure HTTP or not:
- http://machine-name:8222
- https://machine-name:8333
On the resulting page, click the "Add Exception..." button..
On the "Add Security Exception" page, click the "Get Certificate" button, then click the "Confirm Security Exception" button.
You are then presented with the web-based login screen.
Log in with the user specified during the config stage and you are presented with the VMware Intrastructure Web Access Console.
The VMware Server is now installed and ready to use.
Virtual Machine Setup
Now we must define the two virtual RAC nodes. We can save time by defining one VM, then cloning it when it is installed.Click the "Virtual Machine > Create Virtual Machine" menu option, or click the "Create Virtual Machine" link on the bottom right of the console.
Enter the name "RAC1" and accept the standard datastore by clicking the "Next" button.
Select the "Linux operating system" option, and set the version to "Red Hat Enterprise Linux 5 (64-bit)", then click the "Next" button.
Enter the required amount of memory and number of CPUs for the virtual machine, then click the "Next" button. You should enter a minimum of 2048MB of memory.
Click on the "Create a New Virtual Disk" link or click the "Next" button.
Set the disk size to "20 GB" and click the "Next" button.
Click the "Add a Network Adapter" link or click the "Next" button.
Select the "Bridged" option and click the "Next" button.
Click the "Use a Physical Drive" link, or click the "Next" button.
Accept the DVD properties by clicking the "Next" button.
Click the "Don't Add a Floppy Drive" link.
Click the "Add a USB Controller" link, or click the "Next" button.
Click the "Finish" button to create the virtual machine.
Highlight the "RAC1" VM in the "Inventory" pane, then click the "Add Hardware" link in the "Commands" section to the right.
Click the "Network Adapter" link.
Select the "Bridged" option and click the "Next" button.
Click the "Finish" button.
The virtual machine is now configured so we can start the guest operating system installation.
Guest Operating System Installation
Place the first OEL 5 disk in the DVD drive and start the virtual machine by clicking the play button on the toolbar.Click on the "Console" tab. If you have not previously installed the VMware browser plugin you will be prompted to do so. If it is already present, simply click on the black pane to the right to open a new console window.
The resulting console window will contain the OEL boot screen.
Continue through the OEL 5 installation as you would for a normal server. A general pictorial guide to the installation can be found here. More specifically, it should be a server installation with a minimum of 2G swap (3-4G if you want to avoid warnings), firewall and SELinux disabled and the following package groups installed:
- GNOME Desktop Environment
- Editors
- Graphical Internet
- Text-based Internet
- Development Libraries
- Development Tools
- Server Configuration Tools
- Administration Tools
- Base
- System Tools
- X Window System
- hostname: rac1.localdomain
- IP Address eth0: 192.168.2.101 (public address)
- Default Gateway eth0: 192.168.2.1 (public address)
- IP Address eth1: 192.168.0.101 (private address)
- Default Gateway eth1: none
Once the basic installation is complete, install the following packages whilst logged in as the root user. This includes the 64-bit and 32-bit versions of some packages.
# From Enterprise Linux 5 DVD cd /media/cdrom/Server rpm -Uvh binutils-2.* rpm -Uvh compat-libstdc++-33* rpm -Uvh elfutils-libelf-0.* rpm -Uvh elfutils-libelf-devel-* rpm -Uvh gcc-4.* rpm -Uvh gcc-c++-4.* rpm -Uvh glibc-2.* rpm -Uvh glibc-common-2.* rpm -Uvh glibc-devel-2.* rpm -Uvh glibc-headers-2.* rpm -Uvh ksh-2* rpm -Uvh libaio-0.* rpm -Uvh libaio-devel-0.* rpm -Uvh libgcc-4.* rpm -Uvh libstdc++-4.* rpm -Uvh libstdc++-devel-4.* rpm -Uvh make-3.* rpm -Uvh sysstat-7.* rpm -Uvh unixODBC-2.* rpm -Uvh unixODBC-devel-2.* # For OEL, use relevant versions of the following packages from your media. rpm -Uvh oracleasm-2.6.18-194.el5-2.0.5-1.el5.x86_64.rpm \ oracleasm-support-2.1.3-1.el5.x86_64.rpm cd / eject # Install the following package from the Oracle grid media. cd /your/path/to/grid/rpm rpm -Uvh cvuqdisk*
Oracle Installation Prerequisites
Perform. the following steps whilst logged into the RAC1 virtual machine as the root user.Make sure the shared memory filesystem is big enough for Automatic Memory Manager to work.
Make the setting permanent by amending the "tmpfs" setting of the "/etc/fstab" file to look like this.# umount tmpfs # mount -t tmpfs shmfs -o size=1500m /dev/shm
If you are not using DNS, the "/etc/hosts" file must contain the following information.tmpfs /dev/shm tmpfs size=1500m 0 0
Note. The SCAN address should not really be defined in the hosts file. Instead is should be defined on the DNS to round-robin between 3 addresses on the same subnet as the public IPs. For this installation, we will compromise and use the hosts file.127.0.0.1 localhost.localdomain localhost # Public 192.168.2.101 rac1.localdomain rac1 192.168.2.102 rac2.localdomain rac2 # Private 192.168.0.101 rac1-priv.localdomain rac1-priv 192.168.0.102 rac2-priv.localdomain rac2-priv # Virtual 192.168.2.111 rac1-vip.localdomain rac1-vip 192.168.2.112 rac2-vip.localdomain rac2-vip # SCAN 192.168.2.201 rac-scan.localdomain rac-scan
If you are using DNS, then only the first line should be present in the "/etc/hosts" file. The other entries are defined in the DNS, as described here.
Add or amend the following lines to the "/etc/sysctl.conf" file.
Run the following command to change the current kernel parameters.fs.aio-max-nr = 1048576 fs.file-max = 6815744 kernel.shmall = 2097152 kernel.shmmax = 1054504960 kernel.shmmni = 4096 # semaphores: semmsl, semmns, semopm, semmni kernel.sem = 250 32000 100 128 net.ipv4.ip_local_port_range = 9000 65500 net.core.rmem_default=262144 net.core.rmem_max=4194304 net.core.wmem_default=262144 net.core.wmem_max=1048586
Add the following lines to the "/etc/security/limits.conf" file./sbin/sysctl -p
Add the following lines to the "/etc/pam.d/login" file, if it does not already exist.oracle soft nproc 2047 oracle hard nproc 16384 oracle soft nofile 1024 oracle hard nofile 65536
Disable secure linux by editing the "/etc/selinux/config" file, making sure the SELINUX flag is set as follows.session required pam_limits.so
Alternatively, this alteration can be done using the GUI tool (System > Administration > Security Level and Firewall). Click on the SELinux tab and disable the feature.SELINUX=disabled
Either configure NTP, or make sure it is not configured so the Oracle Cluster Time Synchronization Service (ctssd) can synchronize the times of the RAC nodes. In this case we will deconfigure NTP.
If you are using NTP, you must add the "-x" option into the following line in the "/etc/sysconfig/ntpd" file.# service ntpd stop Shutting down ntpd: [ OK ] # chkconfig ntpd off # mv /etc/ntp.conf /etc/ntp.conf.org # rm /var/run/ntpd.pid
Then restart NTP.OPTIONS="-x -u ntp:ntp -p /var/run/ntpd.pid"
Create the new groups and users.# service ntpd restart
Create the directories in which the Oracle software will be installed.groupadd -g 1000 oinstall groupadd -g 1200 dba useradd -u 1100 -g oinstall -G dba oracle passwd oracle
Login as the oracle user and add the following lines at the end of the .bash_profile file.mkdir -p /u01/app/11.2.0/grid mkdir -p /u01/app/oracle/product/11.2.0/db_1 chown -R oracle:oinstall /u01 chmod -R 775 /u01/
# Oracle Settings TMP=/tmp; export TMP TMPDIR=$TMP; export TMPDIR ORACLE_HOSTNAME=rac1.localdomain; export ORACLE_HOSTNAME ORACLE_UNQNAME=RAC; export ORACLE_UNQNAME ORACLE_BASE=/u01/app/oracle; export ORACLE_BASE GRID_HOME=/u01/app/11.2.0/grid; export GRID_HOME DB_HOME=$ORACLE_BASE/product/11.2.0/db_1; export DB_HOME ORACLE_HOME=$DB_HOME; export ORACLE_HOME ORACLE_SID=RAC1; export ORACLE_SID ORACLE_TERM=xterm; export ORACLE_TERM BASE_PATH=/usr/sbin:$PATH; export BASE_PATH PATH=$ORACLE_HOME/bin:$BASE_PATH; export PATH LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib; export LD_LIBRARY_PATH CLASSPATH=$ORACLE_HOME/JRE:$ORACLE_HOME/jlib:$ORACLE_HOME/rdbms/jlib; export CLASSPATH if [ $USER = "oracle" ]; then if [ $SHELL = "/bin/ksh" ]; then ulimit -p 16384 ulimit -n 65536 else ulimit -u 16384 -n 65536 fi fi alias grid_env='. /home/oracle/grid_env' alias db_env='. /home/oracle/db_env'
Create a file called "/home/oracle/grid_env" with the following contents.
ORACLE_SID=+ASM1; export ORACLE_SID ORACLE_HOME=$GRID_HOME; export ORACLE_HOME PATH=$ORACLE_HOME/bin:$BASE_PATH; export PATH LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib; export LD_LIBRARY_PATH CLASSPATH=$ORACLE_HOME/JRE:$ORACLE_HOME/jlib:$ORACLE_HOME/rdbms/jlib; export CLASSPATH
Create a file called "/home/oracle/db_env" with the following contents.
ORACLE_SID=RAC1; export ORACLE_SID ORACLE_HOME=$DB_HOME; export ORACLE_HOME PATH=$ORACLE_HOME/bin:$BASE_PATH; export PATH LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib; export LD_LIBRARY_PATH CLASSPATH=$ORACLE_HOME/JRE:$ORACLE_HOME/jlib:$ORACLE_HOME/rdbms/jlib; export CLASSPATH
Once the "/home/oracle/grid_env" has been run, you will be able to switch between environments as follows.
$ grid_env $ echo $ORACLE_HOME /u01/app/11.2.0/grid $ db_env $ echo $ORACLE_HOME /u01/app/oracle/product/11.2.0/db_1 $
Install VMware Client Tools
On the web console, highlight the "RAC1" VM and click the "Install VMware Tools" link and click the subsequent "Install" button.In the RAC1 console, right-click on the "VMwareTools*.rpm" file and select the "Open with "Software Installer"" option.
Click the "Apply" button and accept the warning by clicking the subsequent "Install Anyway" button.
Next, run the "vmware-config-tools.pl" script. as the root user.
Accept all the default settings and pick the screen resolution of your choice. Ignore any warnings or errors. The VMware client tools are now installed.# vmware-config-tools.pl
Issue the "vmware-toolbox" command as the root user. On the subsequent dialog, check the "Time synchronization..." option and click the "Close" button.
Reboot the server before proceeding. After the reboot, it is possible the monitor will not be recognised. If this is the case don't panic. Follow the instructions provided on the screen and reconfigure the monitor setting, which will allow the XServer to function correctly.
Create Shared Disks
Shut down the RAC1 virtual machine using the following command.Create a directory on the host system to hold the shared virtual disks.# shutdown -h now
On the VMware Intrastructure Web Access Console, click the "Add Hardware" link.# mkdir -p /u01/VM/shared
Click the "Hard Disk" link, or click the "Next" button.
Click the "Create New Virtual Disk" link, or click the "Next" button.
Set the size to "10 GB" and the location to "[standard] shared/asm1.vmdk".
Expand the "Disk Mode" section and check the "Independent" and "Persistent" options. Expand the "Virtual Device Node" section and set the adapter to "SCSI 1" and the device to "1", then click the "Next" button.
Click the "Finish" button to add the new virtual disk.
Repeat the previous hard disk creation steps 4 more times, using the following values:
- File Name: [standard] shared/asm2.vmdk
Virtual Device Node: SCSI 1:2
Mode: Independent and Persistent
- File Name: [standard] shared/asm3.vmdk
Virtual Device Node: SCSI 1:3
Mode: Independent and Persistent
- File Name: [standard] shared/asm4.vmdk
Virtual Device Node: SCSI 1:4
Mode: Independent and Persistent
- File Name: [standard] shared/asm5.vmdk
Virtual Device Node: SCSI 1:5
Mode: Independent and Persistent
Edit the contents of the "/u01/VM/RAC1/RAC1.vmx" file using a text editor, making sure the following entries are present. Some of the tries will already be present, some will not.
Start the RAC1 virtual machine by clicking the "Play" button on the toolbar, then start the console as before. When the server has started, log in as the root user so you can partition the disks. The current disks can be seen by issuing the following commands.disk.locking = "FALSE" diskLib.dataCacheMaxSize = "0" diskLib.dataCacheMaxReadAheadSize = "0" diskLib.dataCacheMinReadAheadSize = "0" diskLib.dataCachePageSize = "4096" diskLib.maxUnsyncedWrites = "0" scsi1.present = "TRUE" scsi1.sharedBus = "VIRTUAL" scsi1.virtualDev = "lsilogic" scsi1:1.present = "TRUE" scsi1:1.fileName = "/u01/VM/shared/asm1.vmdk" scsi1:1.writeThrough = "TRUE" scsi1:1.mode = "independent-persistent" scsi1:1.deviceType = "plainDisk" scsi1:1.redo = "" scsi1:2.present = "TRUE" scsi1:2.fileName = "/u01/VM/shared/asm2.vmdk" scsi1:2.writeThrough = "TRUE" scsi1:2.mode = "independent-persistent" scsi1:2.deviceType = "plainDisk" scsi1:2.redo = "" scsi1:3.present = "TRUE" scsi1:3.fileName = "/u01/VM/shared/asm3.vmdk" scsi1:3.writeThrough = "TRUE" scsi1:3.mode = "independent-persistent" scsi1:3.deviceType = "plainDisk" scsi1:3.redo = "" scsi1:4.present = "TRUE" scsi1:4.fileName = "/u01/VM/shared/asm4.vmdk" scsi1:4.writeThrough = "TRUE" scsi1:4.mode = "independent-persistent" scsi1:4.deviceType = "plainDisk" scsi1:4.redo = "" scsi1:5.present = "TRUE" scsi1:5.fileName = "/u01/VM/shared/asm5.vmdk" scsi1:5.writeThrough = "TRUE" scsi1:5.mode = "independent-persistent" scsi1:5.deviceType = "plainDisk" scsi1:5.redo = ""
Use the "fdisk" command to partition the disks sdb to sdf. The following output shows the expected fdisk output for the sdb disk.# cd /dev # ls sd* sda sda1 sda2 sdb sdc sdd sde sdf #
In each case, the sequence of answers is "n", "p", "1", "Return", "Return", "p" and "w".# fdisk /dev/sdb Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel Building a new DOS disklabel. Changes will remain in memory only, until you decide to write them. After that, of course, the previous content won't be recoverable. The number of cylinders for this disk is set to 1305. There is nothing wrong with that, but this is larger than 1024, and could in certain setups cause problems with: 1) software that runs at boot time (e.g., old versions of LILO) 2) booting and partitioning software from other OSs (e.g., DOS FDISK, OS/2 FDISK) Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite) Command (m for help): n Command action e extended p primary partition (1-4) p Partition number (1-4): 1 First cylinder (1-1305, default 1): Using default value 1 Last cylinder or +size or +sizeM or +sizeK (1-1305, default 1305): Using default value 1305 Command (m for help): p Disk /dev/sdb: 10.7 GB, 10737418240 bytes 255 heads, 63 sectors/track, 1305 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sdb1 1 1305 10482381 83 Linux Command (m for help): w The partition table has been altered! Calling ioctl() to re-read partition table. Syncing disks. #
Once all the disks are partitioned, the results can be seen by repeating the previous "ls" command.
Determine your current kernel.# cd /dev # ls sd* sda sda1 sda2 sdb sdb1 sdc sdc1 sdd sdd1 sde sde1 sdf sdf1 #
Download the appropriate ASMLib RPMs from OTN. In this case we installed the last two from the media, so we just need the first package. For RHEL we would need all three of the following:uname -rm 2.6.18-164.el5 x86_64 #
- oracleasm-support-2.1.3-1.el5.x86_64.rpm
- oracleasmlib-2.0.4-1.el5.x86_64.rpm
- oracleasm-2.6.18-164.el5-2.0.5-1.el5.x86_64.rpm
Configure ASMLib using the following command.rpm -Uvh oracleasm*.rpm
Load the kernel module using the following command.# oracleasm configure -i Configuring the Oracle ASM library driver. This will configure the on-boot properties of the Oracle ASM library driver. The following questions will determine whether the driver is loaded on boot and what permissions it will have. The current values will be shown in brackets ('[]'). Hitting without typing an answer will keep that current value. Ctrl-C will abort. Default user to own the driver interface []: oracle Default group to own the driver interface []: dba Start Oracle ASM library driver on boot (y/n) [n]: y Scan for Oracle ASM disks on boot (y/n) [y]: Writing Oracle ASM library driver configuration: done #
If you have any problems, run the following command to make sure you have the correct version of the driver.# /usr/sbin/oracleasm init Loading module "oracleasm": oracleasm Mounting ASMlib driver filesystem: /dev/oracleasm #
Mark the five shared disks as follows.# /usr/sbin/oracleasm update-driver
It is unnecessary, but we can run the "scandisks" command to refresh the ASM disk configuration.# /usr/sbin/oracleasm createdisk DISK1 /dev/sdb1 Writing disk header: done Instantiating disk: done # /usr/sbin/oracleasm createdisk DISK2 /dev/sdc1 Writing disk header: done Instantiating disk: done # /usr/sbin/oracleasm createdisk DISK3 /dev/sdd1 Writing disk header: done Instantiating disk: done # /usr/sbin/oracleasm createdisk DISK4 /dev/sde1 Writing disk header: done Instantiating disk: done # /usr/sbin/oracleasm createdisk DISK5 /dev/sdf1 Writing disk header: done Instantiating disk: done #
We can see the disk are now visible to ASM using the "listdisks" command.# /usr/sbin/oracleasm scandisks Reloading disk partitions: done Cleaning any stale ASM disks... Scanning system for ASM disks... #
The shared disks are now configured for the grid infrastructure.# /usr/sbin/oracleasm listdisks DISK1 DISK2 DISK3 DISK4 DISK5 #
Clone the Virtual Machine
The current version of VMware Server does not include an option to clone a virtual machine, but the following steps illustrate how this can be achieved manually.Shut down the RAC1 virtual machine using the following command.
Copy the RAC1 virtual machine using the following command.# shutdown -h now
Edit the contents of the "/u01/VM/RAC2/RAC1.vmx" file, making the following change.# cp -R /u01/VM/RAC1 /u01/VM/RAC2
Ignore discrepancies with the file names in the "/u01/VM/RAC2" directory. This does not affect the action of the virtual machine.displayName = "RAC2"
In the VMware Infrastructure Web Access Console, select the "Virtual Machine > Add Virtual Machien to Inventory" menu options and browse for the "/u01/VM/RAC2/RAC1.vmx" file. Once opened, the RAC2 virtual machine is visible on the console.
Start the RAC2 virtual machine by clicking the "Play" button on the toolbar. Select the "I _copied it" option click the "OK" button when prompted.
Ignore any errors during the server startup. We are expecting the networking components to fail at this point.
Log in to the RAC2 virtual machine as the root user and start the "Network Configuration" tool (System > Administration > Network).
Remove the devices with the "%.bak" nicknames. To do this, highlight a device, deactivate, then delete it. This will leave just the regular "eth0" and "eth1" devices. Highlight the "eth0" interface and click the "Edit" button on the toolbar and alter the IP address to "192.168.2.102" in the resulting screen.
Click on the "Hardware Device" tab and click the "Probe" button. Then accept the changes by clicking the "OK" button.
Repeat the process for the "eth1" interface, this time setting the IP Address to "192.168.0.102", and making sure the default gateway is not set for the "eth1" interface.
Click on the "DNS" tab and change the host name to "rac2.localdomain", then click on the "Devices" tab.
Once you are finished, save the changes (File > Save) and activate the network interfaces by highlighting them and clicking the "Activate" button. Once activated, the screen should look like the following image.
Edit the /home/oracle/.bash_profile file on the RAC2 node to correct the ORACLE_SID and ORACLE_HOSTNAME values.
ORACLE_SID=RAC2; export ORACLE_SID ORACLE_HOSTNAME=rac2.localdomain; export ORACLE_HOSTNAME
Also, amend the ORACLE_SID setting in the "/home/oracle/db_env" and "/home/oracle/grid_env" files.
Start the RAC1 virtual machine and restart the RAC2 virtual machine. When both nodes have started, check they can both ping all the public and private IP addresses using the following commands.At this point the virtual IP addresses defined in the "/etc/hosts" file will not work, so don't bother testing them.ping -c 3 rac1 ping -c 3 rac1-priv ping -c 3 rac2 ping -c 3 rac2-priv
Prior to 11gR2 we would probably use the "runcluvfy.sh" utility in the clusterware root directory to check the prerequisites have been met. If you are intending to configure SSH connectivity using the installer this check should be omitted as it will always fail. If you want to setup SSH connectivity manually, then once it is done you can run the "runcluvfy.sh" with the following command.
If you get any failures be sure to correct them before proceeding./mountpoint/clusterware/runcluvfy.sh stage -pre crsinst -n rac1,rac2 -verbose
It's a good idea to take a snapshot of the virtual machines, so you can repeat the following stages if you run into any problems. To do this, shutdown both virtual machines and issue the following commands.
The virtual machine setup is now complete.# cd /u01/VM # tar -cvf 11gR2-RAC-PreGrid.tar RAC1 RAC2 shared # gzip 11gR2-RAC-PreGrid.tar
Install the Grid Infrastructure
Start the RAC1 and RAC2 virtual machines, login to RAC1 as the oracle user and start the Oracle installer.Select the "Install and Configure Grid Infrastructure for a Cluster" option, then click the "Next" button../runInstaller
Select the "Typical Installation" option, then click the "Next" button.
On the "Specify Cluster Configuration" screen, click the "Add" button.
Enter the details of the second node in the cluster, then click the "OK" button.
Click the "SSH Connectivity..." button and enter the password for the "oracle" user. Click the "Setup" button to to configure SSH connectivity, and the "Test" button to test it once it is complete.
Click the "Identify network interfaces..." button and check the public and private networks are specified correctly. Once you are happy with them, click the "OK" button and the "Next" button on the previous screen.
Enter "/u01/app/11.2.0/grid" as the software location and "Automatic Storage Manager" as the cluster registry storage type. Enter the ASM password and click the "Next" button.
Set the redundancy to "External", select all 5 disks and click the "Next" button.
Accept the default inventory directory by clicking the "Next" button.
Wait while the prerequisite checks complete. If you have any issues, either fix them or check the "Ignore All" checkbox and click the "Next" button.
If you are happy with the summary information, click the "Finish" button.
Wait while the setup takes place.
When prompted, run the configuration scripts on each node.
The output from the "orainstRoot.sh" file should look something like that listed below.
The output of the root.sh will vary a little depending on the node it is run on. Example output can be seen here (Node1, Node2).# cd /u01/app/oraInventory # ./orainstRoot.sh Changing permissions of /u01/app/oraInventory. Adding read,write permissions for group. Removing read,write,execute permissions for world. Changing groupname of /u01/app/oraInventory to oinstall. The execution of the script. is complete. #
Once the scripts have completed, return to the "Execute Configuration Scripts" screen on RAC1 and click the "OK" button.
Wait for the configuration assistants to complete.
We expect the verification phase to fail with an error relating to the SCAN, assuming you are not using DNS.
Provided this is the only error, it is safe to ignore this and continue by clicking the "Next" button.INFO: Checking Single Client Access Name (SCAN)... INFO: Checking name resolution setup for "rac-scan.localdomain"... INFO: ERROR: INFO: PRVF-4664 : Found inconsistent name resolution entries for SCAN name "rac-scan.localdomain" INFO: ERROR: INFO: PRVF-4657 : Name resolution setup check for "rac-scan.localdomain" (IP address: 192.168.2.201) failed INFO: ERROR: INFO: PRVF-4664 : Found inconsistent name resolution entries for SCAN name "rac-scan.localdomain" INFO: Verification of SCAN VIP and Listener setup failed
Click the "Close" button to exit the installer.
It's a good idea to take a snapshot of the virtual machines, so you can repeat the following stages if you run into any problems. To do this, shutdown both virtual machines and issue the following commands.
The grid infrastructure installation is now complete.# cd /u01/VM # tar -cvf 11gR2-RAC-PostGrid.tar RAC1 RAC2 shared # gzip 11gR2-RAC-PostGrid.tar
Install the Database
Start the RAC1 and RAC2 virtual machines, login to RAC1 as the oracle user and start the Oracle installer.Uncheck the security updates checkbox and click the "Next" button../runInstaller
Accept the "Create and configure a database" option by clicking the "Next" button.
Accept the "Server Class" option by clicking the "Next" button.
Make sure both nodes are selected, then click the "Next" button.
Accept the "Typical install" option by clicking the "Next" button.
Enter "/u01/app/oracle/product/11.2.0/db_1" for the software location. The storage type should be set to "Automatic Storage Manager". Enter the appropriate passwords and database name, in this case "RAC.localdomain".
Wait for the prerequisite check to complete. If there are any problems either fix them, or check the "Ignore All" checkbox and click the "Next" button.
If you are happy with the summary information, click the "Finish" button.
Wait while the installation takes place.
Once the software installation is complete the Database Configuration Assistant (DBCA) will start automatically.
Once the Database Configuration Assistant (DBCA) has finished, click the "OK" button.
When prompted, run the configuration scripts on each node. When the scripts have been run on each node, click the "OK" button.
Click the "Close" button to exit the installer.
The RAC database creation is now complete.
Check the Status of the RAC
There are several ways to check the status of the RAC. The srvctl utility shows the current configuration and status of the RAC database.The V$ACTIVE_INSTANCES view can also display the current status of the instances.$ srvctl config database -d RAC Database unique name: RAC Database name: RAC Oracle home: /u01/app/oracle/product/11.2.0/db_1 Oracle user: oracle Spfile: +DATA/RAC/spfileRAC.ora Domain: localdomain Start options: open Stop options: immediate Database role: PRIMARY Management policy: AUTOMATIC Server pools: RAC Database instances: RAC1,RAC2 Disk Groups: DATA Services: Database is administrator managed $ $ srvctl status database -d RAC Instance RAC1 is running on node rac1 Instance RAC2 is running on node rac2 $
If you have configured Enterprise Manager, it can be used to view the configuration and current status of the database using a URL like "https://rac1.localdomain:1158/em".$ sqlplus / as sysdba SQL*Plus: Release 11.2.0.1.0 Production on Sat Sep 26 19:04:19 2009 Copyright (c) 1982, 2009, Oracle. All rights reserved. Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production With the Partitioning, Real Application Clusters, Automatic Storage Management, OLAP, Data Mining and Real Application Testing options SQL> SELECT inst_name FROM v$active_instances; INST_NAME -------------------------------------------------------------------------------- rac1.localdomain:RAC1 rac2.localdomain:RAC2 SQL>
For more information see:
来自 “ ITPUB博客 ” ,链接:http://blog.itpub.net/23378530/viewspace-704786/,如需转载,请注明出处,否则将追究法律责任。
转载于:http://blog.itpub.net/23378530/viewspace-704786/