rbf神经网络_学习笔记_matlab doc注解
今天学习了rbf神经网络。
但由于课上讲的内容十分有限，我对于rbf的原理有些模糊，因此在网上找了一些参考资料。
先贴两篇个人觉得有助于理解的博文
https://blog.csdn.net/weiwei9363/article/details/72808496#commentsedit
https://blog.csdn.net/ecnu18918079120/article/details/53365341/#commentBox
笔者阅读了matlab自带的newrbe函数的document，并对其进行了一定的注释：
Here is a radial basis network with R inputs.
Notice that the expression for the net input of a radbas neuron is different from that of other neurons.%%rbf神经网络的输入与其他神经网络不同！
Here the net input to the radbas transfer function is the vector distance between its weight vector w and the input vector p, multiplied by the bias b.
%%传递进neuron的实际上是输入向量与阈值向量之间的距离dist，而这里的阈值向量的选取方法有很多，如kmeans，knn等，最后并对其进行加权(w,b),对函数的sensitivity进行调整，输出n。
The transfer function for a radial basis neuron is
%%一般选取高斯函数，这里有点kernel function的味道，作用是将数据点映射至一个高维空间，使其线性可分，之前在seminar的时候有做过详细了解，有时间的话下篇博文再贴。
Here is a plot of the radbas transfer function.
The radial basis function has a maximum of 1 when its input is 0. As the distance between w and p decreases, the output increases. Thus, a radial basis neuron acts as a detector that produces 1 whenever the input p is identical to its weight vector w.Network Architecture
Radial basis networks consist of two layers: a hidden radial basis layer of S1 neurons, and an output linear layer of S2 neurons.
%%两层结构，隐藏层->输出层
The ||dist|| box in this figure accepts the input vector p and the input weight matrix IW1,1, and produces a vector having S1 elements. The elements are the distances between the input vector and vectors iIW1,1 formed from the rows of the input weight matrix.
The bias vector b1 and the output of || dist || are combined with the MATLAB® operation .* , which does element-by-element multiplication.
%%相乘是以.*执行
Fortunately, you won’t have to write such lines of code. All the details of designing this network are built into design functions newrbe and newrb, and you can obtain their outputs with sim.
You can understand how this network behaves by following an input vector p through the network to the output a2. If you present an input vector to such a network, each neuron in the radial basis layer will output a value according to how close the input vector is to each neuron’s weight vector.
Thus, radial basis neurons with weight vectors quite different from the input vector p have outputs near zero. These small outputs have only a negligible effect on the linear output neurons.
In contrast, a radial basis neuron with a weight vector close to the input vector p produces a value near 1. If a neuron has an output of 1, its output weights in the second layer pass their values to the linear neurons in the second layer.
In fact, if only one radial basis neuron had an output of 1, and all others had outputs of 0s (or very close to 0), the output of the linear layer would be the active neuron’s output weights. This would, however, be an extreme case. Typically several neurons are always firing, to varying degrees.
Now look in detail at how the first layer operates. Each neuron’s weighted input is the distance between the input vector and its weight vector, calculated with dist. Each neuron’s net input is the element-by-element product of its weighted input with its bias, calculated with netprod. Each neuron’s output is its net input passed through radbas. If a neuron’s weight vector is equal to the input vector (transposed), its weighted input is 0, its net input is 0, and its output is 1. If a neuron’s weight vector is a distance of spread from the input vector, its weighted input is spread, its net input is sqrt(−log(.5)) (or 0.8326), therefore its output is 0.5.
%%这里简要讲述了一下rbf的思想，通过比较p与w的distance进行对p的分类，相差越大，其对output的影响趋近于0，反之趋进于1；另外我们可以通过改变spread的取值对input的分布进行调整。Exact Design (newrbe)
You can design radial basis networks with the function newrbe. This function can produce a network with zero error on training vectors. It is called in the following way:
The function newrbe takes matrices of input vectors P and target vectors T, and a spread constant SPREAD for the radial basis layer, and returns a network with weights and biases such that the outputs are exactly T when the inputs are P.
This function newrbe creates as many radbas neurons as there are input vectors in P, and sets the first-layer weights to P’.
%%所以这是个lazyRBF？？没有用knnkmeans取中心？？
Thus, there is a layer of radbas neurons in which each neuron acts as a detector for a different input vector. If there are Q input vectors, then there will be Q neurons.
%%精确径向基神经网络，当径向基的隐节点个数与样本个数相同时，它对样本数据的预测误差将是0。
Each bias in the first layer is set to 0.8326/SPREAD. This gives radial basis functions that cross 0.5 at weighted inputs of +/− SPREAD. This determines the width of an area in the input space to which each neuron responds. If SPREAD is 4, then each radbas neuron will respond with 0.5 or more to any input vectors within a vector distance of 4 from their weight vector.
%%这里可以参考上面那张函数图，总之spread的值要设的尽可能大点，但是太大会导致每一个神经元对output的影响都贼大。
The second-layer weights IW 2,1and biases b2 are found by simulating the first-layer outputs a1, and then solving the following linear expression:
You know the inputs to the second layer (A{1}) and the target (T), and the layer is linear. You can use the following code to calculate the weights and biases of the second layer to minimize the sum-squared error.
Here Wb contains both weights and biases, with the biases in the last column. The sum-squared error is always 0.
There is a problem with C constraints (input/target pairs) and each neuron has C +1 variables (the C weights from the C radbas neurons, and a bias). A linear problem with C constraints and more than C variables has an infinite number of zero error solutions.
Thus, newrbe creates a network with zero error on training vectors. The only condition required is to make sure that SPREAD is large enough that the active input regions of the radbas neurons overlap enough so that several radbas neurons always have fairly large outputs at any given moment. This makes the network function smoother and results in better generalization for new input vectors occurring between input vectors used in the design.
The drawback to newrbe is that it produces a network with as many hidden neurons as there are input vectors. For this reason, newrbe does not return an acceptable solution when many input vectors are needed to properly define a network, as is typically the case.
%%缺点是规模太大，可以选取newrb，见下。More Efficient Design (newrb)
The function newrb iteratively creates a radial basis network one neuron at a time. Neurons are added to the network until the sum-squared error falls beneath an error goal or a maximum number of neurons has been reached. The call for this function is
The function newrb takes matrices of input and target vectors P and T, and design parameters GOAL and SPREAD, and returns the desired network.
The design method of newrb is similar to that of newrbe. The difference is that newrb creates neurons one at a time. At each iteration the input vector that results in lowering the network error the most is used to create a radbas neuron. The error of the new network is checked, and if low enough newrb is finished. Otherwise the next neuron is added. This procedure is repeated until the error goal is met or the maximum number of neurons is reached.
As with newrbe, it is important that the spread parameter be large enough that the radbas neurons respond to overlapping regions of the input space, but not so large that all the neurons respond in essentially the same manner.
Why not always use a radial basis network instead of a standard feedforward network? Radial basis networks, even when designed efficiently with newrbe, tend to have many times more neurons than a comparable feedforward network with tansig or logsig neurons in the hidden layer.
This is because sigmoid neurons can have outputs over a large region of the input space, while radbas neurons only respond to relatively small regions of the input space. The result is that the larger the input space (in terms of number of inputs, and the ranges those inputs vary over) the more radbas neurons required.
On the other hand, designing a radial basis network often takes much less time than training a sigmoid/linear network, and can sometimes result in fewer neurons’ being used, as can be seen in the next example.
终于读完了！qaq明天做几个实例！
很迷。。字看起来大大小小