200 Meter HDMI Extender Over Ethernet With KVM Interface IR Signal Operating instruction

PRODUCT INTRODUCTION

           The 200 meter HDMI+KVM+IR signal extender is composed of transmitter and receiver and supports one to one or one to many receiving and transmission.This product supports audio and video of signal source (computer host, DVD, game console, set-top box, etc.) extended to the display end, where users can receive and hear images and sounds from the signal source in real time and use the signal source.This product supports real-time transmission of HDMI HD audio and video, with the highest resolution: [email protected], and the resolution supports downward compatibility.UTP network cable transmission range up to 200 meters.The "adaptive synchronization" technology, which can dynamically control the updating rate of the display screen by the video output terminal, is added, so that the display screen can be updated completely with the instructions of the video output terminal.

            HDMI video transmitter adopts international standard H.264 format to compress and decompress video, low delay of HD image transmission, suitable for home theater, projector exhibition, multimedia classroom, video conference and other occasions requiring long distance transmission.

KEY PROPERTY

1.   Hess H.264 professional compression chip, with independent IP
2.   Iron shell, small size, experience design, high - grade oil injection process, strong anti-interference ability;
3.  Can transmit 200 meters using UTP Cat5e/6 cable
4.  Video resolution up to 1920*[email protected]
5. Support TX terminal HDMI audio and video local loop output
6.  Support infrared signal return control
7.  Support mouse and keyboard remote control
8.  Support 1-to-1, 1-to-multiple receiver transfers (up to 253 points), many-to-many (16 sends to 235 receives) through Ethernet switches
9. High compatibility, automatic matching of signal source and display device
10.  Built-in automatic adjustment system, so that the image smooth, clear, stable
11.  Built-in ESD electrostatic protection circuit, easy installation, plug and play
12. TCP/IP Ethernet communication, IP based real-time video/audio transmission
13.  Pure Ethernet, simple wiring
14.  Applications: 1: N solutions (store, restaurant, classroom, monitor, projector, TCP/IP network)
15.  Support for normal 100 MB or 1000 MB Ethernet switches

STANDARD  EQUIPMWNT LIST

 HDMI extender transmitter host………. 1 pcs

 HDMI extender receiver hostr …………… 1 pcs                       

 infrared ray remote control………………………. 2 pcs                

 Power adapter …………………………….. 2 pcs                     

 User manual ……………………………….. 1 pcs

SPECIFICATION

Item	S pecification
HDMI signal	Full compatible with HDCP
Transportationprotocol	H2 64
Support resolution	[email protected]@60Hz,[email protected],[email protected]@50/60Hz,[email protected]/60Hz, 1 [email protected]/60Hz
DDC signal voltage	1 2Vp-p(TTL)
TMDS bandw idth	10.2Gbps
Central wave length	1310nm
Trans miss ion distance	CAT6 200m，CAT4 120m , CAT5 180m
IR remote control	Support 38KHz IR remote control
Power supply	DC 5V/2A * 2pcs
Power consumption	TX<4W RX<3 .5W
Working temperature	-20°C~ +80°C
Endlosure mate rial	Aluminum alloy
Product di mension	1 46* 75 * 27mm(WxDxH) *2pcs
Color	Black

PANEL DESCRIPTIONS

1. Rear panel of HDMI extender TX

 

①Status of signal connection 

② HDMI output

③ HDMI input

④ Ethernet port

⑤ IR-TX port

⑥ Reset button

⑦ Power input port

⑦ USB port

 

  2. Rear panel of H DMI extender RX

 

① Status of signal connection

② HDMI output

③ Ethernet port

④ IR-RX port

⑤ Reset button

⑥ Power input port

⑦ USB port

 

CONNECTING AND OPERATING

1) Connect the HDMI signal source (Such as DVD, STB etc) to HDMI Transmitter.

2) Connect CAT5e or 6 cables to both the Ethernet of the transmitter and Ethernet port of the Receiver. (The cables must follow the standard of EIA-TIA 568B).

3) Connect the HDMI display (Such as HD-LCD, HD-DLP) into the Receiver.

4) Connect the power supply into Power port.

5) Connect the IR TX cable into IR TX port on the back panel and affix the emitter onto the source IR windows.

6) Connect IR-RX cable into IR-RX port on the receiver and affix the IR receiver in direct line of site with the handheld remote control. It is recommended to affix the receiver on the display frame /bezel or the display stand. Attention: Insert/Extract cables gently

TYPICAL APPLICATION

1) One to One

2). One to many

Connect HDMI Transmitter port and Receiver ports to the Ethernet Switch

3). Many to many

1. Connect HDMI TX ports with GES24 port, also connect HDMI RX ports with GES24 ports. (GES24 is a specified Vlan switch for this extender).

2. A HTTP server is embedded in TX and RX, you can setup IP address for RX via web browser. Please refer to "Setup HDMI TX and RX" 

Setup HDMI TX and HDMI RX A HTTP server is embedded in each TX and RX. you can setup IP address for HDMI extender via web browser. The default IP address of the TX is 192.168.1.168, MAC address is random. The default IP address of the RX is 192.168.1.160, MAC address is random

 

Step 1: Assign the PC (or laptop) IP address on the computer : “Control Panel”→” Network Connections”→“Local Area Connections Status”→“Properties”→“Internet Protocol (TCP/IP)”, Type the IP address field with 192.168.1.168.11 (0-255) and Subnet mask with 255.255.255.0. After that press OK to save the configuration. Note: The IP address of PC should be different from the IP address of TX and RX.

Step 2: Use an Ethernet Cable to connect the PC (or laptop) and the extender. the power LED for the extender is red and the status LED becomes green.

Step 3: please Ping the connected device through the sequence on computer: “Start”→ “Run”→ input “CMD”→ input “ping 192.168.1.168.55” for TX or input “ping 192.168.1.168.56” for RX, you will receive the reply if the connection is established.

Step 4: Login in IE :192.168.1.168.55 (default IP for TX) or 192.168.1.168.56(default IP for RX), You can setup IP address, subnet mask, gateway, and MAC address for the TX and RX. Please set IP address for each TX and each RX, IP:192.168.1.168.XX (XX:1-255. all IP address for TX and RX must be different . Please set MAC address for TX and RX, MAC is random.

Step 5: After click “Apply” button, the green LED light on the device will go out, you have successfully set IP address for TX and RX now. Note: if you need to restore the device to it’s factory default settings, please power on the device, the red light becomes lighting, waiting about 10 seconds, the green LED light starts working, at this time to press the reset button about 5-10 seconds, then the green light will go out, you have successfully restored IP address to factory IP address now.

MAINTENANCE

Clean this unit with a soft, dry cloth. Never use alcohol, paint thinner of benzine to clean this unit.

PRODUCT SERVICE

1) Damage requiring service:

The unit should be serviced by qualified service personnel if:

(a) The DC power supply cord or AC adaptor has been damaged;

(b) Objects or liquids have gotten into the unit;

(c) The unit has been exposed to rain;

(d) The unit does not operate normally or exhibits a marked change in performance;

(e) The unit has been dropped or the cabinet damaged.

2) Servicing Personnel: Do not attempt to service the unit beyond that described in these operating instructions. Refer all other servicing to authorized servicing personnel.

3) Replacement parts: When parts need replacing ensure the servicer uses parts specified by the manufacturer or parts that have the same characteristics as the original parts. Unauthorized substitutes may result in fire, electric shock, or other hazards.

4) Safety check: After repairs or service, ask the servicer to perform safety checks to confirm that the unit is in proper working condition.

WARRANTY

If your product does not work properly because of a defect in materials or workmanship, our Company (referred to as "the warrantor" ) will, for the length of the period indicated as below, (Parts(2)Year, Labor(90) Days) which starts with the date of original purchase ("Limited Warranty period"), at its option either(a) repair your product with new or refurbished parts, or (b) replace it with a new of a refurbished product. The decision to repair or replace will be made by the

warrantor.

During the "Labor" Limited Warranty period there will be no charge for labor.

During the "Parts" warranty period, there will be no charge for parts. You must mail-in your product during the warranty period. This Limited Warranty is extended only to the original purchaser and only covers product purchased as new. A purchase receipt or other proof of original purchase date is required for Limited Warranty service.

 MAIL-IN SERVICE

When shipping the unit carefully pack and send it prepaid, adequately insured and preferably in the original carton. Include a letter detailing the complaint and provide a day time phone and/or email address where you can be reached. LIMITED

WARRANTY LIMITS AND EXCLUSIONS

1) This Limited Warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage. The Limited Warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures which are caused by products not supplied by warrantor, or failures which result from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment of consumer controls, improper maintenance, power line surge, lightning damage, modification, or service by anyone other than a Factory Service center or other Authorized Servicer, or damage that is attributable to acts of God.

2) THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER "LIMITED WARRANTY COVERAGE". THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRNTY. (As examples, this excludes damages for lost time, cost of having someone remove or re-install an installed unit if applicable, travel to and from the service, loss of or damage to media or images, data or other recorded content. The items listed are not exclusive, but are for illustration only.)

3) PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY, ARE YOUR RESPONSIBILITY.