思科动态路由配置

前提是你自己配置好了端口IP
路由器相邻几个网段就需要配几次network
系统自己默认的是version 1，若有需要就配置version 2，配置version 2后面一定要配no auto-summary
由于我是刚一打开项目就截的图，所以交换机周围是橙色的点点，机器正在启动，你把它们当成绿的就行

路由器25的配置

Router>EN
Router#configure
Configuring from terminal, memory, or network [terminal]?
Enter configuration commands, one per line. End with CNTL/Z.
Router(config-router)#network 222.24.100.0
Router(config-router)#network 222.24.100.176
Router(config-router)#network 222.123.107.8
Router(config-router)#network 222.123.107.4
Router(config-router)#version 2
Router(config-router)#no auto-summary
Router(config-router)#exit

路由器26的配置

Router>EN
Router#configure
Configuring from terminal, memory, or network [terminal]?
Enter configuration commands, one per line. End with CNTL/Z.
Router(config-router)#network 222.24.100.128
Router(config-router)#network 222.24.100.144
Router(config-router)#network 222.123.107.8
Router(config-router)#network 222.123.107.12
Router(config-router)#version 2
Router(config-router)#no auto-summary
Router(config-router)#exit

路由器27配置

Router>EN
Router#configure
Configuring from terminal, memory, or network [terminal]?
Enter configuration commands, one per line. End with CNTL/Z.
Router(config-router)#network 222.24.100.192
Router(config-router)#network 222.123.107.0
Router(config-router)#network 222.123.107.12
Router(config-router)#version 2
Router(config-router)#no auto-summary
Router(config-router)#exit

路由器23配置

Router>EN
Router#configure
Configuring from terminal, memory, or network [terminal]?
Enter configuration commands, one per line. End with CNTL/Z.
Router(config-router)#network 222.24.100.160
Router(config-router)#network 222.123.107.0
Router(config-router)#network 222.123.107.4
Router(config-router)#version 2
Router(config-router)#no auto-summary
Router(config-router)#exit