如何重设或更改Verizon FIOS路由器的密码
Have you ever tried to login to your Verizon FIOS router, only to find out that you’ve got no idea what the password is? Here’s how to reset the password to the factory defaults and get access to your router again.
您是否曾经尝试过登录Verizon FIOS路由器，却发现自己不知道密码是什么？ 这是将密码重置为出厂默认设置并再次访问路由器的方法。
If you’re still looking for a good reason to login to the router, be sure to read our guide to changing your Wi-Fi router channel to optimize your signal, or our explanation on why hiding your wireless SSID is really not a security feature.
如果您仍在寻找登录路由器的正当理由，请务必阅读我们的指南，以更改您的Wi-Fi路由器通道以优化信号 ，或者我们对隐藏无线SSID为何不是真正安全功能的解释 。
登录到路由器 (Logging Into Your Router)
Normally all you need to do in order to login to your router is simply head to http://192.168.1.1 in your browser, and enter in the username and password to get into the settings.
通常，您只需登录浏览器中的http://192.168.1.1即可登录路由器，然后输入用户名和密码进入设置。
On a side note, that password box is really annoying on these Verizon routers.
附带一提，这些Verizon路由器上的密码框确实令人讨厌。
重置您的Verizon路由器的密码 (Resetting the Password for Your Verizon Router)
Each of the Verizon routers will have a Reset button on the back side somewhere, usually with a red circle around it. To reset the router to factory defaults, press this button (using a pen or something similar), and hold it down until all the lights on the router blink and turn off, and then back on—it’ll take somewhere between 10-30 seconds.
每个Verizon路由器的背面某处都会有一个“重置”按钮，通常在其周围有一个红色圆圈。 要将路由器重置为出厂默认设置，请按此按钮(使用笔或类似的东西)，然后按住它直到路由器上的所有指示灯闪烁然后熄灭，然后再重新打开，这大约需要10到30秒钟之间的时间秒。
If it doesn’t work, then try it again.
如果它不起作用，请再试一次。
并且默认密码是… (And the Default Password Is…)
Once you’ve reset the password to the default, it’s going to be set to one of the following—or it might already be set to one of these, so before you reset the router, you should try each of these.
将密码重置为默认密码后，将被设置为以下密码之一，或者可能已被设置为以下密码之一，因此在重置路由器之前，您应该尝试其中的每一种。
-
“Password” – once you reset the password on most of the routers, it should be set to simply password.
“密码” –在大多数路由器上重置密码后，应将其设置为简单密码。
-
“admin” – sometimes the Verizon tech will change the password to admin, though they are supposed to change it to the serial number.
“ admin” –有时，Verizon技术会将密码更改为admin ，尽管他们应该将其更改为***。
-
Serial Number – each router has a serial number on the sticker on the back, and often the password has been changed to match this number.
*** –每个路由器的背面贴纸上都有一个***，并且通常已更改密码以匹配该数字。
-
Blank – and we’re not referring to typing Blank into the password field—on one of the routers the password field should just be ignored, by default, at least.
空白 -我们并不是指在密码字段中输入空白 -在其中一台路由器上，至少默认情况下至少应忽略密码字段。
If you’re still not having any luck, then reset it.
如果您仍然没有运气，请重设。
多种Verizon路由器型号 (Various Verizon Router Models)
We’ve put together a quick little table with all the Verizon router models that we know of, and the default password for each.
我们整理了一张简短的表格，其中包含了我们所知道的所有Verizon路由器型号，以及每种型号的默认密码。
|
|
|
|
|||
| Model Number | Verizon MI424WR | Verizon 9100VM | Verizon 9100EM | D-Link VDI-624 | Actiontec MI424WR |
| Username | admin | admin | admin | admin | admin |
| Password | password | password | password | blank | password |
|
|
|
||||
| 型号编号 | 威瑞森MI424WR | Verizon 9100VM | 威瑞森9100EM | 凌华VDI-624 | 动作科技MI424WR |
| 用户名 | 管理员 | 管理员 | 管理员 | 管理员 | 管理员 |
| 密码 | 密码 | 密码 | 密码 | 空白 | 密码 |
Of course, once we put the table together we realized that they were all the same except for one of them, so the table isn’t very useful… but it looks nice, so we’re leaving it here.
当然，一旦我们将桌子放在一起，我们意识到除了一个桌子以外，它们都是一样的，所以桌子不是很有用……但是看起来不错，所以我们将其留在这里。
更改路由器密码 (Changing Your Router Password)
Once you’re able to login the first time, you’ll be prompted to change the password on the first login—but if you were able to login without having to reset it, you should probably head down to the Quick Links section on the left-hand side, and use the Change Login User Name / Password setting.
首次登录后，系统会提示您更改首次登录的密码-但是，如果无需重新设置即可登录，则可能应转到“快速链接”部分。左侧，然后使用“更改登录用户名/密码”设置。
Naturally, this might be different for your router version, but this is what we’re seeing right now.
自然，这可能与您的路由器版本不同，但这就是我们现在所看到的。
像LastPass这样的密码管理器不起作用 (Password Managers Like LastPass Don’t Work)
If you’re having a problem logging in with a password manager like LastPass, you might not actually have a password problem as much as a password manager problem—for some reason this password box doesn’t work right with password managers.
如果您在使用LastPass之类的密码管理器登录时遇到问题，则实际上可能没有密码管理器问题那么多，因为某些原因，此密码框不适用于密码管理器。
The trick is to just use LastPass to copy the password to the clipboard, and then manually paste it in.
诀窍是仅使用LastPass将密码复制到剪贴板，然后手动将其粘贴。
On a side note: if you’re using another (better) router internally for your network, you should probably disable WEP on the Verizon router.
附带说明：如果内部在网络上使用其他(更好)路由器，则可能应禁用Verizon路由器上的WEP。