构建第一个SpringBoot工程
SpringBoot
是为了简化Spring
应用的创建、运行、调试、部署等一系列问题而诞生的产物,自动装配的特性让我们可以更好的关注业务本身而不是外部的XML配置,我们只需遵循规范,引入相关的依赖就可以轻易的搭建出一个 WEB 工程
未接触 SpringBoot
之前,搭建一个普通的 WEB
工程往往需要花费30分钟左右,如果遇到点奇葩的问题耽搁的时间会更长一点,但自从用了SpringBoot
后,真正体会到什么叫分分钟搭建一个WEB
,让我拥有更多的时间跟我的小伙伴们唠嗑了。使用 SpringBoot
后发现一切是如此的简单(还记得读书那会被JAR包,xml支配的恐惧吗,如今都可以说 good bye)
设计的目标
- 为所有使用
Spring
的开发者提供一个更简单,快速的入门体验 - 提供一些常见的功能、如监控、WEB容器,健康,安全等功能
- 干掉XML,遵循规范,开箱即用
前提
SpringBoot
为我们提供了一系列的依赖包,所以需要构建工具的支持:Maven
或 Gradle
。由于本人更习惯使用Maven
所以后续案例都是基于Maven
与 IntelliJ IDEA
,同时这里是基于最新的SpringBoot2编写的哦...
创建项目
初次接触,我们先来看看如何创建一个Spring Boot
项目,这里以IntelliJ IDEA
为例,其他的IDE工具小伙伴们自行搜索创建方式。创建完项目后,各位小伙伴请认真、细心的对比下与传统的WEB工程有何区别(如:目录结构)。
点击
File -> Project
如果用过 Eclipse/IDEA
等工具的,对创建项目肯定不会陌生,但为了照顾第一次使用的我贴上了图文
选择
Spring Initializr
到这一步选择的时候,如图中选项的是Spring Initializr(官方的构建插件,需要联网)
,第二个是自己选择Maven
构建,为了更好的适合初学者,我们将在本章用插件构建
填写项目基本信息
-
Group:
组织ID,一般分为多个段,这里我只说两段,第一段为域,第二段为公司名称。域又分为org、com、cn
等等,其中org为非营利组织,com为商业组织
。如阿里、淘宝(com.alibaba/com.taobao) -
Artifact:
唯一标识符,一般是项目名称
选择包
Spring Initializr
为我们提供了很多的选项,不同的选项有不同的作用,在初期我们只需要依赖Web -> Web
就可以了,选择好依赖包之后点击Next
-> Finish
目录结果
1
|
- src
|
pom.xml 依赖
因为使用了 Spring Initializr
插件,所以如下的配置都不需要我们自己去写啦,需要注意的是版本要选择 RELEASE
,稳定版本BUG少
1
|
<?xml version="1.0" encoding="UTF-8"?>
|
其它的依赖可以参考:官方文档
主函数入口
注意事项: 一个项目中切记不要出现多个 main
函数,否在在打包的时候 spring-boot-maven-plugin
将找不到主函数(主动指定打包主函数入口除外…)
1
|
/**
|
初窥配置文件
从启动日志中可以发现,SpringBoot
默认的端口是 8080 ,那么如果端口被占用了怎么办呢?不要慌,问题不大,配置文件分分钟解决你的困扰…
1
|
2018-04-20 16:14:46.725 INFO 11184 --- [ main] o.s.b.w.embedded.tomcat.TomcatWebServer : Tomcat started on port(s): 8080 (http) with context path ''
|
修改默认配置
1
|
# 默认的 8080 我们将它改成 9090
|
在启动一次看看日志
1
|
2018-04-20 16:47:05.716 INFO 12108 --- [ main] o.s.b.w.embedded.tomcat.TomcatWebServer : Tomcat started on port(s): 9090 (http) with context path '/chapter1'
|
测试
本次测试采用 junit
进行,当然也可以启动项目后直接访问 http://localhost:9090/chapter/demo1
进行测试
1
|
import org.junit.Before;
|
拓展知识
自定义Banner
SpringBoot
启动的时候我们可以看到如下内容,这一块其实是可以自定义的哦,而且在 2.X 版本中,它支持的格式从文本扩展到banner.txt、banner.jpg、banner.gif、banner.jpeg
等等,只需要在 resouces
目录下添加指定命名的文件即可
1
|
. ____ _ __ _ _
|
总结
目前很多大佬都写过关于 SpringBoot
的教程了,如有雷同,请多多包涵,本教程基于最新的 spring-boot-starter-parent:2.0.1.RELEASE
编写,包括新版本的特性都会一起介绍…