平板电脑4g运行内存够用吗_如何通过Windows平板电脑与其他设备共享3G / 4G Internet连接...
平板电脑4g运行内存够用吗
I’m sure that we are not the only people who carry around multiple devices and only have 1 or 2 mobile data plans. If the device carrying your data plan happens to be your Windows tablet, start celebrating. We’ll show you how you can share that data goodness with your other devices.
我敢肯定，我们不是仅有的携带多种设备并且只有1或2个移动数据计划的人。 如果承载数据计划的设备恰好是Windows平板电脑，请开始庆祝。 我们将向您展示如何与其他设备共享数据优势。
Note: The following method was tested and confirmed working on a Samsung ATIV Tab.
注意：以下方法已通过测试，并确认可在Samsung ATIV Tab上使用。
如何通过Windows Tablet与其他设备共享Internet连接 (How to Share Your Internet Connection With Other Devices From Your Windows Tablet)
Press the Windows + R key combination to bring up a run box, type ncpa.cpl and hit enter.
按Windows + R组合键调出运行框，键入ncpa.cpl并按Enter。
When your network connections control panel window opens, right-click on your Wireless network adapter and select properties from the context menu.
当您的网络连接控制面板窗口打开时，右键单击您的无线网络适配器，然后从上下文菜单中选择属性。
Now switch over to the Sharing tab and allow other devices to use your machine’s internet by selecting the first checkbox and then unchecking the second before clicking on the OK button.
现在，通过单击第一个复选框，然后取消选中第二个复选框，然后单击“确定”按钮，切换到“共享”选项卡，并允许其他设备使用计算机的互联网。
Now press the Win + X keyboard combination to bring up the WinX menu in the bottom left of your screen. From here you will need to launch an administrative command prompt, or PowerShell prompt if you happen to be running Windows 8.1.
现在按Win + X键盘组合，以在屏幕的左下方弹出WinX菜单。 从此处，您将需要启动管理命令提示符，或者如果恰巧正在运行Windows 8.1，则将启动PowerShell提示符。
The first thing we need to do is set up the wireless network, which is done using the netsh command like so:
我们需要做的第一件事是建立无线网络，这是使用netsh命令完成的，如下所示：
netsh wlan set hostednetwork mode=allow ssid=”How-To Geek” key=”Pa$$w0rd$”
netsh wlan设置了托管网络模式= allow ssid =“ How-To Geek”键=“ Pa $$ w0rd $”
Where ssid is the name of your network and key is the password you want users to connect with. It is also worth mentioning that the access point is created with WPA2-PSK (AES) encryption.
其中ssid是您的网络名称，**是您希望用户连接的密码。 还值得一提的是，访问点是使用WPA2-PSK(AES)加密创建的。
Finally we need to start broadcasting our newly created network so that our other devices can pick it up.
最后，我们需要开始广播我们新创建的网络，以便我们的其他设备可以接收它。
netsh wlan start hostednetwork
netsh wlan启动托管网络
That’s all there is to it. When you are done, you can simply run the following command to stop the network.
这里的所有都是它的。 完成后，您只需运行以下命令即可停止网络。
netsh wlan stop hostednetwork
netsh wlan停止托管网络
平板电脑4g运行内存够用吗