智能插座_并非所有设备都可与智能插座一起使用。 这是如何知道

智能插座

Smart outlets are a cheap way to turn your ordinary appliances and fixtures into smart devices. With a smart outlet, you can turn your appliances on and off from your phone, or (in some cases) with your voice through devices like the Amazon Echo. But not every device will work with smart outlets.

智能插座是将普通家用电器和固定装置转变为智能设备的廉价方法。 使用智能插座，您可以通过手机(或在某些情况下) 通过Amazon Echo之类的设备打开和关闭设备 。 但是，并非所有设备都可以与智能插座配合使用。

All smart outlets (like the Belkin WeMo, ConnectSense, and others) mostly work the same–you plug them into an existing outlet, set them up to connect them to your home’s Wi-Fi network, and then plug something into the smart outlet to begin controlling it from your smartphone using the accompanying app.

所有智能插座(例如Belkin WeMo ， ConnectSense等)都可以正常工作-您将它们插入现有插座，进行设置以将它们连接到家庭的Wi-Fi网络，然后将某些插头插入到开始使用随附的应用程序从您的智能手机控制它。

That means, however, that the electronic device you’re plugging in must be on at all times in order for the smart outlet to control it. That can actually cause some problems, since many devices work differently as far as the power is concerned.

但是，这意味着您要插入的电子设备必须始终处于打开状态，以便智能插座对其进行控制。 实际上，这可能会引起一些问题，因为就电源而言，许多设备的工作方式有所不同。

All appliances and electronics have a mechanical switch or an electronic switch to turn them on and off, and knowing the difference between the two is critical if you want to take advantage of a smart outlet.

所有电器和电子产品都有一个机械开关或一个电子开关来打开和关闭它们，要想利用智能插座，了解两者之间的差异至关重要。

A mechanical switch on a device is a switch with two states that you physically switch back and forth in order to turn it on and off. Think of a rocker switch or a toggle switch when it comes to this–you flip the switch from one side to the other in order to power it on or off.

设备上的机械开关是一种具有两种状态的开关，您可以通过两种状态进行物理来回切换以将其打开和关闭。 考虑到翘板开关或拨动开关 ，您可以将开关从一侧翻转到另一侧，以便打开或关闭电源。

An electronic switch is merely a button that toggles between states. When you press the button, it’ll put the device in the opposite state its currently in, no matter what happened when you pressed it last. Unlike a physical switch, which has distinct “on” and “off” positions, it uses the circuit board’s memory to know whether the next button press should be an “on” or an “off”. When you wipe that memory by unplugging the device, the first press after you plug it back in will always be an “on”, since that’s how the memory is programmed.

电子开关仅仅是在状态之间切换的按钮。 当您按下按钮时，无论最后一次按下该按钮时，它将使设备处于与当前状态相反的状态。 与具有不同的“开”和“关”位置的物理开关不同，它使用电路板的内存来知道下一次按下按钮是“开”还是“关”。 通过拔出设备擦拭内存时，插回电源后的第一次按将始终处于“开”状态，因为这是对内存进行编程的方式。

How does this affect smart outlets? When you turn a device on or off with a smart outlet, it’s essentially the same as unplugging the appliance or electronic device and plugging it back in (respectively). This is fine for devices with mechanical switches, since their switch will still be in the “on” position when the smart outlet turns back on. But it doesn’t work for devices with electronic switches, which will stay off until you press their switch again.

这如何影响智能插座？ 当您使用智能插座打开或关闭设备时，本质上与分别拔出设备或电子设备的插头并重新插入相同。 这对于带有机械开关的设备很好，因为当智能插座重新打开时，它们的开关仍将处于“开”位置。 但这不适用于带有电子开关的设备，这些设备会一直保持关闭状态，直到您再次按下它们的开关为止。

This limits what you can use with a smart outlet. More and more appliances and electronic devices are using electronic switches as manufacturers move to using digital components instead of older analog components.

这限制了您可以在智能插座上使用的功能。 随着制造商转向使用数字组件而不是老式的模拟组件，越来越多的电器和电子设备正在使用电子开关。

The moral of the story? If you’re buying an appliance you plan to use with a smart outlet, make sure it has the right kind of switch.

这个故事的主旨？ 如果要购买打算与智能插座一起使用的设备，请确保其具有正确的开关类型。

Pretty much every lamp or light fixture still uses a mechanical switch these days. You can also still find space heaters, air conditioners, and other newer appliances that still use mechanical switches, you’ll just need to check before you buy.

如今，几乎每个灯泡或灯具仍使用机械开关。 您仍然可以找到仍使用机械开关的太空取暖器，空调和其他较新的电器，您只需要在购买前进行检查。

If you’re not sure what kind of switch a device has, a quick way to find out is by turning it on, unplugging it while it’s still on, and then plugging it back in. If it doesn’t automatically turn back on, then it won’t work with a smart outlet.

如果您不确定设备具有哪种开关，一种快速的查找方法是打开设备，在设备仍处于打开状态时将其拔出，然后再插回去。如果设备没有自动重新打开，则无法在智能插座上使用。

翻译自: https://www.howtogeek.com/258757/not-all-appliances-work-with-smart-outlets.-heres-how-to-know/

智能插座