高考难度世界各国排行_如何解锁《我的世界》地图的难度

高考难度世界各国排行

Minecraft 1.8 introduced a new feature map feature: the ability to permanently lock the map’s difficulty setting. While it’s a great way to encourage you to play without cheating it’s also frustrating if the difficulty is locked at a setting you don’t want. Read on as we show you how both permanently change the setting and unlock it.

Minecraft 1.8引入了新的功能地图功能：能够永久锁定地图的难度设置。 虽然这是鼓励您玩而不作弊的好方法，但如果将难度锁定在不需要的设置上，也会感到沮丧。 继续阅读，我们将向您展示如何永久更改和解锁设置。

什么是难度锁？ (What’s the Difficulty Lock?)

Chances are if you’ve found this article via search query you know exactly what the difficulty lock is and you’re ready to get rid of it. To bring everyone else up to speed: the difficulty lock is a feature introduced in Minecraft 1.8 that allows players to permanently lock the difficulty setting of a non-cheat-enabled survival game.

如果您通过搜索查询找到了这篇文章，那么您很可能确切地知道难度锁定是什么，并且您已经准备好摆脱它。 使其他所有人都快上一步：难度锁定是Minecraft 1.8中引入的一项功能，允许玩家永久锁定非作弊生存游戏的难度设置。

The feature was introduced after players asked for it as it prevents you from changing the difficulty to escape a hairy situation. Thus, if you set the game to survival, no cheats, and hard difficulty you can’t flip the difficulty of the game at the drop of a hat to save yourself (e.g. turning it into “Peaceful” difficulty to force all the monsters to despawn after you find yourself hopelessly lost and starving in an abandoned mineshaft).

此功能是在玩家要求后才引入的，因为它可以防止您更改难度以免遇到麻烦。 因此，如果您将游戏设置为生存，没有作弊和困难的游戏，那么您就不能在放下帽子时翻转游戏的难度来拯救自己(例如，将游戏变成“和平”的难度来迫使所有怪物在发现自己无可救药地迷失并且饿死在废弃的矿井中后恢复生命)。

By default the game difficulty is not locked, but you can find the setting to do so by pressing the “ESC” key to pull up the settings menu and then navigating to the “Options” submenu.

默认情况下，游戏难度未锁定，但您可以通过按“ ESC”键上拉设置菜单，然后导航至“ Options”子菜单来找到要执行的设置。

The difficulty lock (seen in blue above) is located right next to the difficulty selection button. Once you press that lock button and confirm your choice the difficulty level for the map cannot be changed with in-menu settings and can only be changed by either enabling game cheats through a backdoor trick of sorts or by editing the actual game file. Let’s take a look at both methods now.

难度锁定(上方蓝色)位于难度选择按钮的旁边。 一旦按下该锁定按钮并确认选择，就无法使用菜单内设置更改地图的难度级别，只能通过通过各种后门技巧启用游戏作弊功能或通过编辑实际游戏文件来更改地图的难度级别。 现在让我们来看看这两种方法。

使用LAN技巧改变难度 (Changing the Difficulty with the LAN Trick)

If you just want to change the difficulty setting and you don’t care if you actually unlock it, there’s a little trick that relies on opening your game for play on the local LAN. It doesn’t matter if you’re not actually playing with another person (or if there is even another computer on your network). When you open a game for LAN play you’re granted the ability to both change the game mode (e.g. Survival to Creative) and the ability to toggle cheats on and off.

如果您只想更改难度设置，而又不在乎是否真正解锁它，则有一个小窍门依赖于打开游戏以在本地LAN上玩。 您是否实际上没有与其他人玩(或者网络上甚至还有另一台计算机)都没有关系。 当你打开局域网游戏玩你授予的能力都改变游戏模式(如生存，以创新)， 并能够切换和关闭作弊。

First let’s take a look at the difficulty setting on our test world.

首先，让我们看一下测试环境中的难度设置。

At present it’s set to “Hard” and locked. There is no way to change the options with the in-game menus and clicking on either the lock icon or the difficulty selection button yields no result. It’s time to trot out the old open-to-LAN trick to work around the lock.

目前已设置为“硬”并已锁定。 无法通过游戏内菜单更改选项，单击锁定图标或难度选择按钮均不会产生结果。 是时候散发出旧的开放局域网技巧来解决锁问题了。

To do so press the “ESC” key to pull up the settings menu, click on “Open to LAN” and then when presented with the LAN game options select “Allow Cheats: ON” as seen in the screenshot above.

为此，按“ ESC”键上拉设置菜单，单击“ Open to LAN”，然后在出现LAN游戏选项时，选择“ Allow Cheats：ON”，如上面的屏幕快照所示。

Once cheats are enabled then you can use console commands to change the difficulty setting despite the lock. Return to the game and press the “T” key to pull up the chat box/console.

一旦启用了作弊功能，尽管已锁定，您仍可以使用控制台命令更改难度设置。 返回游戏并按“ T”键以拉起聊天框/控制台。

Enter the command “/difficulty peaceful” to change the difficulty level. (The designations for difficulty levels are “peaceful,” “easy,” and “hard,” or “0,” “1,” “2,” respectively.)

输入命令“ /难度和平”以更改难度级别。 (难度级别的名称分别为“和平”，“容易”和“困难”或“ 0”，“ 1”，“ 2”。)

Now when you look in the settings menu again you’ll find that the difficulty level has been adjusted based on your console command parameter.

现在，当您再次查看设置菜单时，您会发现已根据控制台命令参数调整了难度级别。

Note, however, that the difficulty setting is still locked. Outside of opening your game to the LAN and enabling cheats every time you restart the game to make any changes you want, you will not be able to adjust the difficulty level.

但是请注意，难度设置仍处于锁定状态。 除了将游戏打开到LAN并在每次重新启动游戏以进行所需的更改时启用作弊功能之外，您将无法调整难度级别。

If you only want to make a single change, such as if you discover that you don’t like the higher difficulty level and just wish to dial it back permanently to a lower level, this trick is perfect and requires no outside software; the change will persist over time even if you leave the game and lose the open-to-LAN cheat mode you enabled. If you want to unlock the lock itself (and not just adjust the setting behind the scenes with a console command) you’ll need to use a Minecraft level editor.

如果您只想进行单个更改，例如发现自己不喜欢较高的难度级别，而只是希望将其永久地拨回较低的级别，则此技巧很完美，不需要任何外部软件； 即使您离开游戏并失去了启用的LAN欺骗作弊模式，更改也会随着时间的流逝而持续。 如果您想解锁锁本身(而不仅仅是使用控制台命令在后台调整设置)，则需要使用Minecraft关卡编辑器。

解锁难度锁 (Unlocking the Difficulty Lock)

While the previously outlined no-extra-software required trick will likely be sufficient for most people just looking to switch the difficulty setting once, for those of you that like adjusting the difficulty on the fly without resorting to console cheat commands then a more permanent fix is in order.

尽管先前概述的无需额外软件即可完成的技巧对于大多数只希望切换一次难度设置的人来说可能就足够了，但对于那些喜欢即时调整难度而无需借助控制台作弊命令的人来说，这是一个永久解决方案一切顺利。

To make permanent changes to the lock mode you need to edit the actual game file, the level.dat. You can’t just slap the file in a text editor, however, as Minecraft uses a specific formatting known as Named Binary Tag (NBT). To that end, we need to call upon a tool you may recall from a previous Minecraft tutorial, How to Switch a Minecraft World from Survival to Creative to Hardcore, NBTExplorer.

要永久更改锁定模式，您需要编辑实际的游戏文件level.dat。 但是，您不能只是在文本编辑器中拍打文件，因为Minecraft使用一种称为命名二进制标记(NBT)的特定格式。 为此，我们需要调用一个您可能从以前的Minecraft教程中调用过的工具，即NBTExplorer， 如何将Minecraft世界从生存转换为创意 ， 再转换为硬核 。

NBTExplorer is a free cross-platform designed specifically for editing Minecraft’s NBT-based game files. You can find versions for Windows, Mac, and Linux on the NTBExplorer GitHub page or read more about it at the official thread on the Minecraft forums.

NBTExplorer是一个免费的跨平台设计，专门用于编辑Minecraft基于NBT的游戏文件。 您可以在NTBExplorer GitHub页面上找到适用于Windows，Mac和Linux的版本，或在Minecraft论坛上的官方线程中了解有关该版本的更多信息。

Note: Although this technique is very safe and very unlikely to corrupt your data, always backup your world data before editing it. If you don’t know how to do so, check out our guide to backing up Minecraft data here.

注意：尽管此技术非常安全并且极不可能损坏您的数据，但始终在编辑之前备份您的世界数据。 如果您不知道如何操作，请在此处查看我们的备份Minecraft数据指南 。

Download and run the application. By default it looks for world data in your default Minecraft saves folder but if you want to edit a save located outside of the default directory you can always browse for it using the File -> Open command to locate the file.

下载并运行该应用程序。 默认情况下，它会在默认的Minecraft保存文件夹中查找世界数据，但是如果您要编辑默认目录之外的保存，则始终可以使用文件->打开命令浏览该文件以找到该文件。

Our test world for this tutorial is called, creatively enough, “Lock Test I”. To access the setting for the difficulty lock, expand both the entry for the save file you wish to edit and the subsequent entry for “level.dat” as seen in the screenshot below.

在本教程中，我们的测试世界被称为“锁定测试I”。 要访问难度锁定的设置，请展开您要编辑的保存文件的条目和“ level.dat”的后续条目，如下面的屏幕快照所示。

The entry we’re looking for, among the dozens found in the level.dat file, is right up at the top: “DifficultyLocked.” The default value is “0” or unlocked; it shifts to “1” when you lock the difficulty setting in game.

在level.dat文件中找到的几十个条目中，我们正在寻找的条目就位于顶部：“ DifficultyLocked”。 默认值为“ 0”或未锁定。 当您锁定游戏中的难度设置时，它将变为“ 1”。

To permanently unlock the difficulty setting simply double click on the “DifficultyUnlocked” entry and edit the “1” to a “0”. When you’re done make sure to save the changes via File->Save (CTRL+S or the equivalent keyboard shortcut on your system). Let’s load our game back and up check the difficulty setting.

要永久解锁难度设置，只需双击“ DifficultyUnlocked”条目，然后将“ 1”编辑为“ 0”。 完成后，请确保通过“文件”->“保存”(CTRL + S或系统上等效的键盘快捷键)保存更改。 让我们重新加载游戏并向上检查难度设置。

The difficulty selection setting is unlocked and we’re free to change the difficulty setting without resorting to console command or file editing.

难度选择设置已解锁，我们可以自由更改难度设置，而无需借助控制台命令或文件编辑。

Have a Minecraft question big or small? Send us an email at [email protected] and we’ll do our best to answer it.

我的世界有大小问题吗？ 给我们发送电子邮件至[email protected]，我们将尽力回答。

翻译自: https://www.howtogeek.com/213615/how-to-unlock-the-difficulty-of-a-minecraft-map/

高考难度世界各国排行