ipad电量低不能充电_电池电量低时如何为环形门铃充电
ipad电量低不能充电
The Ring Doorbell is a Wi-Fi-enabled doorbell system with an integrated camera so that you can quickly see who’s at the door. But its internal battery means that you need to recharge it once or twice every year. Here’s how to recharge the Ring Doorbell whenever the battery gets low.
环形门铃是一个具有Wi-Fi功能的门铃系统 ，带有集成摄像头，因此您可以快速查看谁在门口。 但是其内置电池意味着您需要每年对其充电一次或两次。 以下是在电池电量低时为环形门铃充电的方法。
While you can run the Ring Doorbell off of traditional doorbell wiring and not bother with recharging the battery, its big feature is that it can be powered completely by the internal battery so that you don’t have to mess with any wires, making installation super easy. The good news is that recharging the Ring Doorbell unit is really simple.
尽管您可以不用传统的门铃布线就可以使用环形门铃，而不必为电池充电而烦恼，但它的一大特点是可以完全由内部电池供电，因此您无需弄乱任何电线，从而使安装超级方便简单。 好消息是，为Ring Doorbell单元充电非常简单。
First off, you can see how much juice your Ring Doorbell still has left by opening up the Ring app on your phone and tapping on the device at the top of the screen.
首先，您可以通过在手机上打开Ring应用并点击屏幕顶部的设备，来查看Ring Doorbell还剩下多少果汁。
The battery level will appear in the upper-right corner.
电池电量将显示在右上角。
If you want an exact percentage of how much battery is left, tap on the gear icon in the top-right corner of the screen.
如果您想知道剩余电量的确切百分比，请点击屏幕右上角的齿轮图标。
From there, you’ll be able to see the battery percentage remaining.
从那里，您将可以看到剩余的电池电量百分比。
To recharge the Ring Doorbell, you’ll need to remove it from its mounting bracket and bring it inside, so start by removing the two security screws on the bottom using the included screwdriver that came with your Ring Doorbell. After they’re removed, you can lift it up and then out to remove the unit. Bring it inside because you’ll need to plug it into your computer or an outlet.
要给环形门铃充电，您需要将其从安装支架上卸下并放入内部，因此首先请使用环形门铃随附的螺丝刀卸下底部的两个安全螺钉。 卸下它们后，您可以将其提起然后取出以卸下设备。 将其带入内部，因为您需要将其插入计算机或插座。
On the back side of the Ring Doorbell, there’s a microUSB port that you’ll use to charge it up.
在环形门铃的背面，有一个microUSB端口可用于充电。
Take the included orange cable that came with your Ring Doorbell (or use just any microUSB cable) and plug it into the Ring Doorbell unit.
取下环形门铃随附的随附橙色电缆(或仅使用任何microUSB电缆)，然后将其插入环形门铃装置。
Take the other end and plug it into your computer, or into a wall outlet using a USB-to-AC adapter. The blue LED ring light around the doorbell button will light up and show the status of how charged up it is. When the ring fills all the way up, then the battery has been charged to 100%.
将另一端插入计算机或使用USB到AC适配器的墙上插座。 门铃按钮周围的蓝色LED环形指示灯将点亮并显示其充电状态。 当圆环完全充满时，则表明电池已充电至100％。
It will take a few hours to charge it up, especially if the battery was nearly dead. I charged mine up when it was at around 60% and it took about an hour.
充电需要几个小时，特别是如果电池快没电了。 当它达到60％左右时，我给我充电了，大约花了一个小时。
Of course, the only downside is that while you’re charging up your Ring Doorbell, there’s nothing there if someone comes to your front door, so you won’t be able to see who’s there from your phone. However, a few hours once or twice every year isn’t too bad of a sacrifice, especially with such an easy installation.
当然，唯一的缺点是，当您为Ring Doorbell充电时，如果有人进入您的前门，那里什么也没有，所以您将无法从手机中看到谁在那儿。 但是，每年一次或两次几个小时的牺牲并不算太糟，尤其是在安装如此简单的情况下。
翻译自: https://www.howtogeek.com/263522/how-to-charge-your-ring-doorbell-when-the-battery-gets-low/
ipad电量低不能充电