[RPI]设置静态IP,让你的树莓派连上内网---[浙江大学嵌入式系统]
1. 设置mac地址
RPi设置mac地址的方式和一般linux相同。
sudo ifconfig eth0 down hw ether xx:xx:xx:xx:xx:xx sudo ifconfig eth0 up
运行后用ifconfig就能看到修改结果。
2.设置静态ip,网关,子网掩码
参考地址:http://elinux.org/RPi_Setting_up_a_static_IP_in_Debian
文件地址为:/etc/network/interfaces
执行命令:
sudo /etc/init.d/networking restart
完成后执行 ifconfig 查看修改结果。
3.dns设置
在文件:/etc/resolv.conf 末尾追加如下内容 nameserver 10.10.0.21
至此,如果没有出现特殊情况 执行命令
ping 10.10.10.34
结果如图:
温馨提醒:千万别忘了插上网线!!!
转载于:https://www.cnblogs.com/zxRPI/archive/2013/03/03/2942049.html