从提示框：VMware上的Windows 8，快速Windows 7搜索和可重复使用的扎带
Once week we round up the best reader tips and share them here. This week we’re looking at running Windows 8 as a VMware machine, speeding up Windows 7 search with Agent Ransack, and making zip ties reusable.
每周一次，我们收集最佳读者技巧并在此处分享。 本周，我们将Windows 8作为VMware机器运行，使用Agent Ransack加快Windows 7的搜索速度，并使拉链式领带可重复使用。
在VMware中运行Windows 8 (Running Windows 8 in VMware)
Chaotic Platypus writes in with this tip:
混沌鸭嘴兽写道：
Found a nice guide (not my work) that worked well for a ~5 minute Windows 8 Dev. Preview setup in VMware Workstation 8.
找到了一个不错的指南 (不是我的工作)，该指南在大约5分钟的Windows 8开发中运行良好。 在VMware Workstation 8中预览设置。
I have the “Windows Developer Preview with developer tools English, 64-bit (x64)” running w/o any issues now. I was not able to get the same process to work with Workstation 7, but it works great in 8.
我现在正在运行“ Windows Developer Preview，使用开发人员工具英语64位(x64)”，没有任何问题。 我无法使用相同的过程来使用Workstation 7，但在8中运行良好。
Great tip off Chaotic, for those readers who are VirtualBox fans you can read our guide to setting up Windows 8 in VirtualBox here.
关于Chaotic的一个很好的建议，对于那些是VirtualBox粉丝的读者，您可以在此处阅读我们的指南，以在VirtualBox中设置Windows 8 。
使用AgentRansack搜索Windows (Search Windows with AgentRansack)
Jim writes in with the following tip:
吉姆写了以下提示：
Why bother setting up complicated search techniques when you can use AgentRansack on any version of Windows? It supports Boolean expressions, search inside documents, and more. Best of all it’s free!
当您可以在任何版本的Windows上使用AgentRansack时，为什么还要设置复杂的搜索技术呢？ 它支持布尔表达式，在文档内部搜索等等。 最棒的是它是免费的！
AgentRansack is a solid application, thanks for writing in Jim!
AgentRansack是一个可靠的应用程序，感谢您使用Jim编写！
调整拉链领带以提高可重复使用性 (Tweaking Zip Ties for Reusability)
Bob read this read tip about reusing zip ties and wrote in with his own tip:
鲍勃(Bob)阅读了有关重复使用扎带的阅读技巧，并用自己的技巧写道：
I just read the article about flipping the zip ties over to make them reuseable, here’s another way to reuse them:
我刚刚读了有关翻转拉链以使其可重复使用的文章，这是重复使用它们的另一种方法：
Unless one is used on soft material that blocks the locking end when tightened, try this. If the free end of the tie is long enough or you have a free one, take the narrow end that you push thru the locking end and push it into the locking block that’s locked onto the tie on the side that the little “latch” locks into the tang. While keeping a modest amount of pressure on it, tug gently on the tie next to the block.
除非在拧紧时会阻塞锁定端的软质材料上使用，否则请尝试此操作。 如果领带的自由端足够长，或者您有一个自由端，则将狭窄的一端推入锁定端，然后将其推入锁定在小“闩锁”一侧的领带上的锁定块中进入唐。 在保持适度压力的同时，轻轻拖拉砌块旁边的领带。
The object is to disengage the locking tongue from the tang’s teeth that are holding it in place (not to shove another tie thru). Then while holding the “latch”, slide the disengaged tang past. Sometimes doing this pushes the locking piece a little too far, and it won’t engage again. Not a problem, just take the end again and push into the block in the opposite direction to push it back into position again.
目的是使锁舌脱离将其固定在适当位置的柄脚上的牙齿(而不要推另一根领带)。 然后，在握住“闩锁”的同时，将脱离的柄脚滑过。 有时这样做会将锁定件推得太远，并且它不会再次啮合。 没问题，只需将末端再次插入，然后以相反的方向推入模块，再将其推回原位即可。
It seems there is no end to the clever ways people can manipulate the simple zip tie. Thanks for sharing Bob!
人们似乎无法操纵巧妙的方式来操纵简单的拉链领带。 感谢您分享鲍勃！
Have a tip of your own to share? Send it on to [email protected] and there’s a good chance you’ll see it on the front page.
有自己的建议要分享吗？ 将其发送到[email protected] ，很有可能您会在首页上看到它。