在iOS中绘制标尺 - 在屏幕上精确1厘米 - 如何绘制相距1毫米的线条?
问题描述:
我想绘制一个尺子,对于任何可用的iOS设备,线条/蜱之间的精确距离为1mm。通常我会得到PPI并计算像素的距离。使用Objective-C,它似乎不能以这种方式工作。在iOS中绘制标尺 - 在屏幕上精确1厘米 - 如何绘制相距1毫米的线条?
linesDist
应该在“屏幕坐标像素”中包含我的1mm距离。
任何想法,我怎么能做到这一点?
我的基本代码如下所示:RulerView.m,这是一个UIView:
-(void)drawRect:(CGRect)rect
{
[[UIColor blackColor] setFill];
float linesDist = 3.0; // 1mm * ppi ??
float linesWidthShort = 15.0;
float linesWidthLong = 20.0;
for (NSInteger i = 0, count = 0; i <= self.bounds.size.height; i = i + linesDist, count++)
{
bool isLong = (int)i % 5 == 0;
float linesWidth = isLong ? linesWidthLong : linesWidthShort;
UIRectFill((CGRect){0, i, linesWidth, 1});
}
}
编辑 PPI检测(真难看),基于下面的答案:
float ppi = 0;
switch ((int)[UIScreen mainScreen].bounds.size.height) {
case 568: // iPhone 5*
case 667: // iPhone 6
ppi = 163.0;
break;
case 736: // iPhone 6+
ppi = 154.0;
break;
default:
return;
break;
}
答
的iPhone(与iPhone6 +可能是个例外),每英寸163 “逻辑” 之分。显然,从4开始的手机的分辨率是双倍或更高,但这对坐标系没有任何影响。
因此1mm为163/25.4或约6.4。 iPad每毫米5.2点,iPad mini与iPhone相同。
-(void)drawRect:(CGRect)rect
{
[[UIColor blackColor] setFill];
float i;
float linesDist = 163.0/25.4; // ppi/mm per inch (regular size iPad would be 132.0)
float linesWidthShort = 15.0;
float linesWidthLong = 20.0;
for (i = 0, count = 0; i <= self.bounds.size.height; i = i + linesDist, count++)
{
bool isLong = (int)count % 5 == 0;
float linesWidth = isLong ? linesWidthLong : linesWidthShort;
UIRectFill((CGRect){0, i, linesWidth, 1});
}
}
您想为i使用float,以避免在添加距离时避免舍入错误并避免不必要的转换。
答
我不确定,但是,屏幕尺寸是以像素或点计算的。您可以考虑使用它们中的任何一个,并根据您的数学创建一个等于或近似等于mm的刻度。1 pixel = 0.26 mm and 1 point = 0.35 mm.
因此,对于您的情况,请为每1毫米绘制一个标记,差不多为3分。
尝试这样:
UIView *markView = [[UIView alloc] initWithFrame:CGRectMake(x, y, 1, 1)];
lineView.backgroundColor = [UIColor blackColor];
[self.view addSubview:lineView];
// and increment the (x,y) coordinate for 3 points and draw a mark
谢谢你:)还是觉得有点不确定:我需要检查3例:iPad的正常,iPhone6 +,休息和调整PPI /毫米? – BananaAcid
是的,你需要为iPad和(可能)iPhone 6+的特殊情况。不幸的是,可靠地区分iPad和iPad mini并不是微不足道的。 –
就逻辑点而言,iPhone 6似乎已经达到约154ppi。 –