SIM900 AT命令响应解析
我使用sim900 gps/gprs模块屏蔽连接到Arduino Uno,我将如何解析我的AT命令的响应?或者,如何在发送AT命令后删除串行打印的第一行?在上面的输出SIM900 AT命令响应解析
AT+CMGL="ALL"
+CMGL: 1,"REC READ","+XXXXXXXXXX","","16/04/25,15:20:59+32"
Hilp akp si ralphh the pogi one mmalit mi pizza hehehehehe
+CMGL: 2,"REC READ","+XXXXXXXXXX","","16/04/25,21:51:33+32"
Yow!!!
OK
例子,我想摆脱AT + CMGL =“所有”,然后离开了数据分析,什么是解析
我将如何解析我的AT命令的响应?
是的,这是正确的问题。
如何在发送AT命令后删除串行打印的第一行?
不,这是一个错误的问题要问,因为如果你关心回声是否在打开,你是做错了。
用于解析AT命令输出正确的策略如下:
- 发送AT命令行(与
"\r"
正确终止)。 - 读取从调制解调器收到的一个字符和一个字符,直到完成一行以
"\r\n"
终止,然后解析该行。- 如果该行等于最终结果代码,则命令行的所有输出都已完成(并且调制解调器已准备好接收新命令)。这必须是您测试的第一件事!
- 如果运行AT命令的信息文本响应行有前缀(几乎都有),请检查该行是否以该行开头,如果是,则处理该行,否则忽略它。
- 如果运行的AT命令没有前缀,您可能需要打印所有内容,直到收到最终结果代码。这仅适用于像
ATI
这样的传统命令,并且对于解析这些命令您可能合法地关心是否回显。
现在为AT+CMGL
命令是一点点的工作,因为响应在多行分割。
首先,最好的信息来源应该是制造商特定的AT文档,其次是标准化AT+CMGL
命令的官方3GPP 27.005规范。
在文本模式下为AT + CMGL响应被指定为
+CMGL: <index>,<stat>,<oa/da>,[<alpha>],[<scts>][,<tooa/toda>,
<length>]<CR><LF><data>[<CR><LF>
+CMGL: <index>,<stat>,<da/oa>,[<alpha>],[<scts>][,<tooa/toda>,
<length>]<CR><LF><data>[...]]
因此接收开头的行之后“+ CMGL:”所有以下,直到读出的空行(行为“\ r \ n“)属于这个。
请参阅this answer关于一般的代码结构和流程,虽然如上面写的响应的多行属性需要多一点处理。我会用类似下面的(未测试的代码):
enum CMGL_state {
CMGL_NONE,
CMGL_PREFIX,
CMGL_DATA
};
// Extra prototype needed because of Arduino's auto-prototype generation which often breaks compilation when enums are used.
enum CMGL_state parse_CMGL(enum CMGL_state state, String line);
enum CMGL_state parse_CMGL(enum CMGL_state state, String line)
{
if (line.equals("\r\n") {
return CMGL_NONE;
}
if (line.startsWith("+CMGL: ") {
return CMGL_PREFIX;
}
if (state == CMGL_PREFIX || state == CMGL_DATA) {
return CMGL_DATA;
}
return CMGL_NONE;
}
...
write_to_modem("AT+CMGL=\"ALL\"\r");
CMGL_state = CMGL_NONE;
goto start;
do {
CMGL_state = parse_CMGL(CMGL_state, line);
switch (CMGL_state) {
case CMGL_PREFIX:
process_prefix(line); // or whatever you want to do with this line
break;
case CMGL_DATA:
process_data(line); // or whatever you want to do with this line
break;
case CMGL_NONE:
default:
break;
}
start:
line = read_line_from_modem();
} while (! is_final_result_code(line))
第一行AT+CMGL="ALL"
似乎是最好的方式成为回声。您可以通过在setup
功能中向您的模块发送ATE0
来禁用它。
至于其余的数据,它们都有相同的格式。您可以使用不同的字符串操作函数轻松编写解析器。
圣洁非常感谢你!我一直在寻找一种方法来消除这些回声几天,但我仍然不知道如何解析数据,你能给我一个简单的例子,我可以使用吗? – Ralph
@Ralph你的意思是像两个小时前[在Arduino网站上]已经给你的答案](http://arduino.stackexchange.com/questions/23575/split-string-into-an-array-of-串)? – frarugi87
@ frarugi87是的,因为我不知道什么时候调用函数和什么参数,为什么它会返回一个int 1,并且当我尝试将序列存储到字符数组中时,我会得到随机字符 'if(mySerial。可用()> 0){ for(byte i = 0; i Ralph
如果您正在使用arduino
我会建议使用一个好的库!你不需要处理这些东西。尝试http://www.gsmlib.org/或者您可以找到任何您喜欢的其他人。
我会在这里列举一个例子。
#include "SIM900.h"
#include <SoftwareSerial.h>
//If not used, is better to exclude the HTTP library,
//for RAM saving.
//If your sketch reboots itself proprably you have finished,
//your memory available.
//#include "inetGSM.h"
//If you want to use the Arduino functions to manage SMS, uncomment the lines below.
#include "sms.h"
SMSGSM sms;
//To change pins for Software Serial, use the two lines in GSM.cpp.
//GSM Shield for Arduino
//www.open-electronics.org
//this code is based on the example of Arduino Labs.
//Simple sketch to send and receive SMS.
int numdata;
boolean started=false;
char smsbuffer[160];
char n[20];
void setup()
{
//Serial connection.
Serial.begin(9600);
Serial.println("GSM Shield testing.");
//Start configuration of shield with baudrate.
//For http uses is raccomanded to use 4800 or slower.
if (gsm.begin(2400)){
Serial.println("\nstatus=READY");
started=true;
}
else Serial.println("\nstatus=IDLE");
if(started){
//Enable this two lines if you want to send an SMS.
//if (sms.SendSMS("3471234567", "Arduino SMS"))
//Serial.println("\nSMS sent OK");
}
};
void loop()
{
if(started){
//Read if there are messages on SIM card and print them.
if(gsm.readSMS(smsbuffer, 160, n, 20))
{
Serial.println(n);
Serial.println(smsbuffer);
}
delay(1000);
}
};
哇这是很多吸收,非常感谢你这个有用的信息我只是怀疑我的能力,完全实现这个,因为这是我第一次处理AT命令和解析,仍然有点有些部分有点困惑..非常感谢! – Ralph