Virtualbox 安装Red hat Enterprise Linux(64位)
1.需要安装 Virtualbox。
2.新建一个虚拟机。
3,为虚拟机命名(选择Linux,RedHat64位的版本)可能有的电脑选不到64位的版本,只有32位的版本,接下来会说明。
如果没有显示64位,则进入电脑BIOS进行虚拟化设置,如惠普电脑HP ProBokk修改地址:F10àAdvancedàSystem Optionsà勾选2VT(2VT指的是把两个虚拟化技术都勾选上)
4.分配虚拟内存大小
5.创建虚拟硬盘,点 创建 就是(界面和我的不一样没关系,因为我已经装好了的)
6.点下一步
7.动态分配
8.设置虚拟硬盘大小(建议15个G)
9.然后就创建好了
10.选中新创建的虚拟机-设置(启动顺序:硬盘,然后是光驱)
11.安装光盘镜像加载到光驱(要先删除自带的光驱分配,再新建。选择第二IDE控制器主通道)
12.设置网卡
13.启动虚拟机进行安装
14.选择第一项直接回车
15.跳过安装介质检查
16.安装语言可以使用英文,也可以使用中文(英语不好就选中文,这里选择英文)
17.设置密码(超级用户密码)
18.初学者可以选择Desktop,带有桌面环境
19.安装完成,重启后进行系统初始化
20.创建用户
21.初始化完成,登录操作系统
至此,Linux红帽版本的安装就已经完成了